Fuel injectors
  1. Home
  2. denso
  3. #09010-01712

09010-01712 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-01712 BODY ASSY, INJECTI
Rating:
49
Buy BODY ASSY, INJECTI 09010-01712 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-01712 BODY ASSY, INJECTI 6 075 1202 40
001. [01] 09011-00972 HOUSING SUB-ASSY, 22101-1090A
001-001. [03] 94904-30010 BOLT, STUD 22857-1060A
002. [08] 09013-10102 HOLDER, DELIVERY V 22108-1110A
003. [08] 94914-02710 O-RING 22817-1040A
004. [08] 09013-60220 SPRING, DELIVERY V 22125-1100
005. [08] 09013-30050 STOPPER, DELIVERY 22117-1050A
006. [08] 09014-00390 VALVE SUB-ASSY, IN 22103-1280
007. [08] 94901-00670 WASHER 22843-1500A
008. [08] 09015-04520 ELEMENT SUB-ASSY, 22104-1500A
009. [08] 09042-00010 HOLDER ASSY, ELMEN 22144-1020A
010. [08] 94901-34340 WASHER, PLATE, SK 22867-1110A
011. [08] 09043-60030 COVER, ELEMENT 22332-1300A
012. [08] 94907-20780 RING, SNAP 98191-9103A
013. [16] 09013-90170 O-RING
014. [08] 94914-00991 O-RING 22817-1030A
015. [08] 94901-00680 WASHER 22863-1290A
016. [ C] 09043-80060 SHIM, ELEMENT HOLD 22881-2850
016. [ C] 09043-80050 SHIM, ELEMENT HOLD 22881-2840
016. [ C] 09043-80040 SHIM, ELEMENT HOLD 22881-2830
016. [ C] 09043-80030 SHIM, ELEMENT HOLD 22881-2820
016. [ C] 09043-80020 SHIM, ELEMENT HOLD 22881-2810
016. [ C] 09043-80010 SHIM, ELEMENT HOLD 22881-2800A
017. [08] 09043-20010 PLATE, DELIVERY VA 22104-1360
018. [16] 90258-10001 WASHER, SPRING 28219-1120A
019. [16] 90160-10081 NUT, HEXAGON 22825-1090A
020. [01] 09021-20162 RACK, CONTROL 22113-1220A
021. [02] 09011-40060 BUSHING, CONTROL R 22114-1090A
022. [01] 94908-20290 PIN, STRAIGHT 22358-1260A
023. [01] 09036-70010 BUSHING, CONTROL R 22841-1510A
024. [08] 09016-00130 SLEEVE SUB-ASSY, C
025. [08] 09016-30060 SEAT, SPRING, UPR 22119-1040A
026. [08] 09016-40130 SPRING, PUMP PLUNG 22121-1060A
027. [08] 09016-50041 SEAT, SPRING, LWR 22122-1080A
028. [08] 09017-00110 TAPPET SUB-ASSY,IN 22309-2180A
028-001. [08] 09018-10170 ROLLER, INJECTION 22569-1080A
028-002. [08] 09017-80060 BUSHING, INJECTION 22322-1410A
028-003. [08] 09016-90100 BODY, INJECTION PU 22568-1120A
028-003. [08] 09017-10131 TAPPET, INJECTION
028-004. [08] 09017-60080 PIN, INJECTION PUM 22358-1250A
028-005. [08] 09017-50040 SLIDER 6 306 1205 40
029. [01] 09019-10330 CAMSHAFT, INJECTIO 22123-1280A
030. [01] 09036-10070 BEARING, CENTER 22837-1010A
031. [09] 90258-06001 WASHER, SPRING 28219-1110A
032. [04] 90000-06151 SCREW, SLOTTED PAN 22815-1570A
033. [02] 94910-10130 BEARING, ROLLER 22837-1050A
034. [01] 09020-10110 COVER, BEARING 22111-1190A
035. [01] 94915-00650 SEAL, OIL 22823-1240A
036. [01] 94914-03940 O-RING 22817-1470A
037. [2C] 09020-80070 PLATE, SHIM 22881-2920A
037. [2C] 09020-80060 PLATE, SHIM 22881-2910A
037. [2C] 09020-80050 PLATE, SHIM 22881-2900A
037. [2C] 09020-80040 PLATE, SHIM 22881-2890A
037. [2C] 09020-80030 PLATE, SHIM 22881-2880A
037. [2C] 09020-80020 PLATE, SHIM 22881-2870A
037. [2C] 09020-80010 PLATE, SHIM 22881-2860A
038. [01] 09043-30010 RETAINER, BEARING 22111-1200A
039. [02] 90015-06181 SCREW, SLOTTED OVA 22865-1010A
039. [02] 94900-66510 SCREW
040. [03] 90160-06051 NUT, HEXAGON 22825-1480A
041. [01] 09031-70031 PLUG, SCREW 22845-1330A
042. [08] 09031-70011 PLUG, SCREW 22841-1500A
043. [01] 09027-10390 PLATE, INJECTION P 22127-1180A
044. [16] 90045-06121 SCREW, SLOTTED POL 22865-1130A
045. [01] 09043-10011 COVER, DELIVERY VA 22136-1050A
047. [02] 90060-06451 SCREW, CROSSRECESS 22815-2270A
048. [01] 94918-00060 SCREW, HOLLOW 22835-1110A
049. [01] 09027-20270 GASKET, INJECTION 22847-1810A
051. [01] 94918-00310 SCREW, HOLLOW S2283-51310-A
052. [01] 94918-00500 SCREW, HOLLOW 22835-1190A
053. [03] 94901-02470 WASHER 22847-1900A
055. [01] 94918-00420 SCREW, HOLLOW 22835-1180A
056. [02] 94901-02500 WASHER 22847-1920A
058. [01] 09031-00062 VALVE ASSY, OVERFL 22107-1030A
061. [02] 91410-06101 BOLT, W/WASHER 22815-2560A
063. [01] 94914-00380 O-RING 22817-1540A
067. [02] 09140-30110 WASHER, LOCK 22877-1020A
068. [08] 94901-81500 WASHER, COPPER PLA 22847-1120A
069. [01] 94901-80710 WASHER, COPPER PLA 22863-1300A
070. [01] 09011-80031 NEEDLE, TIMING 22132-1020A
071. [07] 94901-02490 WASHER 22877-1100A

Include in #3:

09000-05114 as BODY ASSY, INJECTI
09000-06213
09010-01712
19000-01811

Cross reference number



Part num Firm num Firm Name
09010-01712  6 075 1202  BODY ASSY, INJECTI




Information:

start by: a) remove fuel injection pumpsb) separation of governor from fuel injection pump housingc) remove fuel transfer pump1. Loosen the screws that hold the levers to the shaft assembly. 2. Remove the screw (1) that holds the lever assembly (2) to the shaft assembly. 3. Remove the shaft assembly (5) from the housing and remove the levers (3) and lever assembly (2).4. Loosen the screws that hold the levers (6) to the shaft.5. Remove the screw that holds the lever (4) to the shaft.6. Remove the shaft (7) from the housing and remove the levers. 7. Remove the lifter and roller assemblies (8) from the housing with a magnet. Put identification on the lifters (10) and rollers (9) for installation in their respective bores in the housing. 8. Remove the camshaft (11) from the housing.
Do not use a force to remove the camshaft. Turn the camshaft to permit the free passage of the camshaft by the bosses (12) in the housing.
Assemble Fuel Injection Pump Housing
1. Install the camshaft (1) in the housing.
Do not use a force to install the camshaft. Turn the camshaft to permit the free passage of the camshaft by the bosses in the housing.
2. Install the lifter and roller assemblies (2) in their respective bores in the housing with a magnet. Install the lifters with their grooves in alignment with the pins (3) in the housing. 3. Put the shaft (4) in the housing. Slide the levers (6) and the lever (5) on to the shaft in the order shown. Push the shaft into position in the housing. 4. Install the screw that holds the lever (5) to the shaft. Tighten the screw to a torque of 24 2 lb.in. (27.7 2.3 cm.kg). 5. Put the shaft assembly (7) in the housing. Slide the levers (9) and the lever assembly (8) on to the shaft in the order shown. Push the shaft assembly into position in the housing. 6. Install the screw that holds the lever assembly (8) to the shaft assembly. Tighten the screw to a torque of 24 2 lb. in. (27.7 2.3 cm.kg).end by: a) make adjustments to the sleeve control shafts (see TESTING AND ADJUSTING)b) install fuel transfer pumpc) connection of governor to fuel injection pump housingd) install fuel injection pumps

Have questions with 09010-01712?





09010-02730 BODY ASSY, INJECTI 09010-02500 09010-01702 09010-01690 09010-01671
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 09010-01021

Group cross 09010-01712

Back to top