Fuel injectors
  1. Home
  2. denso
  3. #09010-01121

09010-01121 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

09010-01121 BODY ASSY, INJECTI
Rating:
53
Buy BODY ASSY, INJECTI 09010-01121 genuine, new aftermarket engine parts with delivery

Scheme ###:

BODY ASSY, INJECTI
000. [01] 09010-01121 BODY ASSY, INJECTI 04203-30000
001. [01] 09010-90650 HOUSING SUB-ASSY,
001-001. [02] 94904-30010 BOLT, STUD 85265-00057
002. [01] 09024-00010 BLEEDER SUB-ASSY, 09024-00010
002-001. [01] 09024-10010 WASHER, AIR BLEEDE MM500486
002-002. [01] 09024-20010 NIPPLE, AIR BLEEDE 85265-00013
002-003. [01] 09024-30030 PACKING, AIR BLEED 85265-00016
002-004. [01] 09024-40010 SCREW, AIR BLEEDER 09024-40010
006. [02] 09015-00851 ELEMENT SUB-ASSY,
007. [02] 09014-00061 VALVE SUB-ASSY, IN MM500964
008. [02] 09013-70010 GASKET, DELIVERY V 85265-00019
009. [02] 09013-60040 SPRING, DELIVERY V 09013-60040
010. [02] 09013-10010 HOLDER, DELIVERY V 09013-10010
011. [01] 09021-20070 RACK, CONTROL 09021-20070
012. [01] 09021-50011 SCREW, RACK GUIDE 09021-50011
012. [01] 09021-50060 SCREW, RACK GUIDE 09021-50060
013. [02] 09016-10330 SLEEVE, PLUNGER CO
013. [02] 09016-10160 SLEEVE, PLUNGER CO 85265-00073
014. [02] 09015-60010 PINION, PLUNGER CO 85265-00074
015. [02] 09015-70010 SCREW, PLUNGER CON 85265-00027
016. [02] 09016-30010 SEAT, SPRING, UPR 09016-30010
016. [02] 09016-30191 SEAT, SPRING, UPR
017. [02] 09016-40010 SPRING, PUMP PLUNG 85265-00029
018. [02] 09016-50010 SEAT, SPRING, LWR 85265-00031
019. [02] 09017-00130 TAPPET SUB-ASSY,IN 85265-00032
019. [02] 09017-00020 TAPPET SUB-ASSY,IN 85265-00032
019-001. [01] 09017-30010 BOLT, INJECTION PU
019-002. [01] 09017-40010 NUT, INJECTION PUM
019-003. [01] 09017-10173 TAPPET, INJECTION
019-004. [01] 09017-60010 PIN, INJECTION PUM
019-005. [01] 09018-10030 ROLLER, INJECTION
019-006. [01] 09017-80030 BUSHING, INJECTION
019-007. [01] 09017-50040 SLIDER
020. [02] 09018-90090 PLUG, INJECTION PU
022. [01] 09019-10231 CAMSHAFT, INJECTIO
024. [02] 94910-10120 BEARING, ROLLER
025. [02] 09019-30020 RING, CAMSHAFT ADJ
026. [ C] 09019-40060 PLATE, CAMSHAFT SH 09019-40060
026. [ C] 09019-40050 PLATE, CAMSHAFT SH 09019-40050
026. [ C] 09019-40040 PLATE, CAMSHAFT SH 09019-40040
026. [ C] 09019-40030 PLATE, CAMSHAFT SH 09019-40030
026. [ C] 09019-40020 PLATE, CAMSHAFT SH
026. [ C] 09019-40010 PLATE, CAMSHAFT SH
027. [01] 09029-00240 GAUGE SUB-ASSY, IN
028. [01] 19025-00060 PIPE ASSY, OVERFLO ME02327900
028-001. [01] 09025-00060 NIPPLE SUB-ASSY, O
028-002. [01] 94907-21030 RING, SNAP 94907-21030
028-003. [01] 94959-21601 PIPE, STRAIGHT ME02327800
031. [01] 94915-01750 SEAL, OIL
032. [01] 94918-00600 SCREW, HOLLOW
033. [01] 94918-00310 SCREW, HOLLOW 85265-00078
034. [02] 09022-20070 WASHER, FUEL PIPE 85265-00079
035. [02] 09025-10010 WASHER, INJECTION 85265-00077
036. [01] 09027-00750 COVER SUB-ASSY, IN 09027-00750
036. [01] 09027-00580 COVER SUB-ASSY, IN
036-001. [01] 09027-10270 PLATE, INJECTION P
036-002. [01] 09027-20040 GASKET, INJECTION 09027-20040
037. [01] 94900-50040 SCREW, SLOTTED FLA
039. [01] 09023-00031 PLATE SET, VALVE H 85265-00052
049. [01] 09020-40030 FLANGE, INJECTION
050. [04] 94900-72471 SCREW, W/WASHER
051. [01] 90258-08001 WASHER, SPRING CSA915D100
052. [01] 94900-62961 SCREW 94900-62960
053. [02] 94914-00060 O-RING 85265-00061
054. [01] 09024-30030 PACKING, AIR BLEED 85265-00016

Include in #3:

09000-02543 as BODY ASSY, INJECTI
09000-02942
09000-03541
09010-01121

Cross reference number



Part num Firm num Firm Name
09010-01121  04203-3000  BODY ASSY, INJECTI




Information:

Disassembly and Inspection of Oil Pump
Measurement of Clearance Between Outer Rotor and Inner Rotor
Measure the clearance between the outer rotor and inner rotor, and, if the limit value is exceeded, replace the pump assembly.
Measurement of clearance between outer rotor and inner rotorMeasurement of Rotor and Case End Play
Measure the rotor and case end play, and, if the limit value is exceeded, replace the pump assembly.
Measurement of rotor and cover end playMeasurement of Clearance Between Outer Rotor and Pump Case
Measure the clearance between the outer rotor and pump case, and, if the limit value is exceeded, replace the pump assembly.
Measure the clearance between the outer rotor and caseReassembly of Oil Pump
Install the outer rotor to the pump case, check alignment mark (indentations) on the pump case cover, and then tighten the bolts. If the alignment marks are not aligned during the reassembly, the pump will not suck oil.
Alignment marks on pump case and pump case coverOil Filter and Oil Cooler
Disassembly and Inspection of Oil Filter and Oil Cooler
Relief Valve
Inspection of Relief Valve
(1) Check the relief valve and valve seat for contact condition, and the spring for fatigue and damage, and replace any defective parts.(2) Measure the valve opening pressure (oil pressure when the engine is running at rated rpm) of the relief valve, and, if the standard valve is exceeded, remove the cap bolt and make an adjustment by increasing or decreasing the shim thickness.
Relief Valve

Have questions with 09010-01121?





09010-02730 BODY ASSY, INJECTI 09010-01500 09010-01173 09010-01091 09010-01072
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-00000 09010-01010

Group cross 09010-01121

Back to top