Information pump assy, injecti
PUMP ASSY, INJECTI
EA
- NEW P/N:094500-0484
Nozzle:
0935001000

Rating:
Components :
001. | PUMP ASSY, INJECTI | 09000-08510 |
Scheme ###:
000. | [01] | 09000-08510 | PUMP ASSY, INJECTI | |
005. | [01] | 09013-10010 | HOLDER, DELIVERY V | ME022081 |
006. | [01] | 19011-01860 | HOUSING KIT, INJEC | MM501042 |
007. | [01] | 09013-60200 | SPRING, DELIVERY V | ME022083 |
008. | [01] | 09013-70010 | GASKET, DELIVERY V | ME022084 |
009. | [01] | 09014-00500 | VALVE SUB-ASSY, IN | MM500010 |
010. | [01] | 09015-01432 | ELEMENT SUB-ASSY, | MM500206 |
011. | [01] | 09016-10200 | SLEEVE, PLUNGER CO | MM500878 |
012. | [01] | 09016-30010 | SEAT, SPRING, UPR | ME702061 |
013. | [01] | 09016-40010 | SPRING, PUMP PLUNG | ME702062 |
014. | [01] | 09016-50160 | SEAT, SPRING, LWR | MM514055 |
015. | [1C] | 09031-10190 | PLATE, TAPPET ADJU | MM500970 |
015. | [1C] | 09031-10270 | PLATE, TAPPET ADJU | MM500978 |
015. | [1C] | 09031-10260 | PLATE, TAPPET ADJU | MM500977 |
015. | [1C] | 09031-10250 | PLATE, TAPPET ADJU | MM500976 |
015. | [1C] | 09031-10240 | PLATE, TAPPET ADJU | MM500975 |
015. | [1C] | 09031-10230 | PLATE, TAPPET ADJU | MM500974 |
015. | [1C] | 09031-10220 | PLATE, TAPPET ADJU | MM500973 |
015. | [1C] | 09031-10210 | PLATE, TAPPET ADJU | MM500972 |
015. | [1C] | 09031-10200 | PLATE, TAPPET ADJU | MM500971 |
015. | [1C] | 09031-10460 | PLATE, TAPPET ADJU | MM514422 |
016. | [01] | 09017-00160 | TAPPET SUB-ASSY,IN | |
017. | [01] | 09018-30060 | PIN, INJECTION PUM | MM500881 |
018. | [01] | 09018-40060 | RING, CLAMP | MM500371 |
019. | [01] | 09021-00121 | RACK ASSY, CONTROL | MM500374 |
020. | [01] | 09022-20080 | WASHER, FUEL PIPE | ME702235 |
020. | [01] | 94901-81020 | WASHER, COPPER PLA | ME022309 |
021. | [01] | 09024-40180 | SCREW, AIR BLEEDER | MM501152 |
022. | [01] | 09024-50210 | SCREW, HOLLOW | MM501320 |
023. | [01] | 09022-30010 | PLATE, PUSH | MM500401 |
024. | [01] | 09055-40040 | SPRING, DIAPHRAGM | MM500405 |
025. | [01] | 90400-16101 | PIN, SPLIT | MM500431 |
026. | [01] | 09007-80013 | COVER | MM500365 |
027. | [1C] | 09021-90790 | STOPPER | MM500155 |
027. | [1C] | 09021-90930 | STOPPER | MM500015 |
027. | [1C] | 09021-90920 | STOPPER | MM500014 |
027. | [1C] | 09021-90850 | STOPPER | MM500149 |
027. | [1C] | 09021-90840 | STOPPER | P760-15640 |
027. | [1C] | 09021-90830 | STOPPER | P760-15630 |
027. | [1C] | 09021-90820 | STOPPER | P760-15620 |
027. | [1C] | 09021-90810 | STOPPER | P760-15610 |
027. | [1C] | 09021-90800 | STOPPER | P760-15600 |
027. | [1C] | 09021-90950 | STOPPER | MM500208 |
Include in #3:
09000-08510
as PUMP ASSY, INJECTI
Cross reference number
Part num | Firm num | Firm | Name |
09000-08510 | PUMP ASSY, INJECTI |
Information:
Daily
Walk-Around Inspection - Inspect engine for leaks and loose connections Engine Crankcase - Check oil level Cooling System - Check coolant level Clutch - Check/Adjust/Lubricate Air Starter & Air Tank (if equipped) - Check Engine Air Cleaner - Check service indicator SR4 Generator - Inspect/CheckEvery 1,900 L (500 gal) of Fuel or 50 Service Hours*
Dust Collector - Clean Light Duty Air Cleaner (If Equipped) - ReplaceEvery 4,250 L (1,100 gal) of Fuel or 125 Service Hours*
Clutch - Check/Adjust/Lubricate Generator Space Heaters - CheckEvery 8,500 L (2,200 gal) of Fuel or 250 Service Hours*
Scheduled Oil Sampling (S O S)1 - Obtain Sample Engine Oil and Filter(s)1 - Change Crankcase Breather1 - Clean Engine Valve Lash (Between First 250 and 1000 Service Hours Only)1 - Check/Adjust Cooling System - Test for supplemental coolant additive concentration Fuel System - Clean/Replace filters, Drain water from fuel tank Radiator Fins, Aftercooler, Belts, and Hoses - Inspect/Check Fan Drive Bearing - Lubricate Batteries - Clean/Check Magnetic Pickup (At First Oil Change Only - Inspect/Clean1These maintenance requirements are to be performed between the 250 and the 1000 Service Hour interval for engines equipped with turbochargers (T, TA & ATAAC) ONLY. Refer to 500 Hour interval for Naturally Aspirated (NA) Engines.Every 17,000 L (4,500 gal) of Fuel or 500 Service Hours (NA Only)*
Scheduled Oil Sampling (S O S) - Obtain Sample Engine Oil and Filter(s) - Change Crankcase Breather - Clean Engine Valve Lash (Between First 500 and 1000 Service Hours Only) - Check/AdjustEvery 34,000 L (9,000 gal) of Fuel or 1000 Service Hours*
Engine Protection Devices - Inspect SR4 Generator and Control Panel - Inspect Fuel Control Linkage - LubricateEvery 67,000 L (18,000 gal) of Fuel or 2000 Service Hours*
Engine Valve Lash, Valve Rotators, Fuel Ratio Control, Set Point, and Low Idle - Check/Adjust Fuel Injection Nozzles - Test/Clean/Replace Turbocharger - Inspect Engine Mounts - Inspect Crankshaft Vibration Damper - Inspect SR4 Generator - Check/Inspect Clean/LubricateEvery 91,000 L (24,000 gal) of Fuel or 3000 Service Hours or Two Years*
Cooling System - Add Extender (Extended Life Coolant Only) - Cooling System - Drain/Clean/Replace Coolant - Conventional Coolant/Antifreeze Only Water Pump Seal - Inspect/Replace Hoses - Replace Thermostat - ReplaceEvery 136,000 L (36,000 gal) of Fuel or 4000 Service Hours*
Magnetic Pickup - Inspect/Clean SR4 Generator - Check/Inspect/Clean/LubricateEvery 204,000 L (54,000 gal) of Fuel or 6,000 Service Hours or Four Years
Cooling System - Drain/Flush/Replace Coolant (Extended Life Coolant Only)*Perform previous maintenance interval items first.
Walk-Around Inspection - Inspect engine for leaks and loose connections Engine Crankcase - Check oil level Cooling System - Check coolant level Clutch - Check/Adjust/Lubricate Air Starter & Air Tank (if equipped) - Check Engine Air Cleaner - Check service indicator SR4 Generator - Inspect/CheckEvery 1,900 L (500 gal) of Fuel or 50 Service Hours*
Dust Collector - Clean Light Duty Air Cleaner (If Equipped) - ReplaceEvery 4,250 L (1,100 gal) of Fuel or 125 Service Hours*
Clutch - Check/Adjust/Lubricate Generator Space Heaters - CheckEvery 8,500 L (2,200 gal) of Fuel or 250 Service Hours*
Scheduled Oil Sampling (S O S)1 - Obtain Sample Engine Oil and Filter(s)1 - Change Crankcase Breather1 - Clean Engine Valve Lash (Between First 250 and 1000 Service Hours Only)1 - Check/Adjust Cooling System - Test for supplemental coolant additive concentration Fuel System - Clean/Replace filters, Drain water from fuel tank Radiator Fins, Aftercooler, Belts, and Hoses - Inspect/Check Fan Drive Bearing - Lubricate Batteries - Clean/Check Magnetic Pickup (At First Oil Change Only - Inspect/Clean1These maintenance requirements are to be performed between the 250 and the 1000 Service Hour interval for engines equipped with turbochargers (T, TA & ATAAC) ONLY. Refer to 500 Hour interval for Naturally Aspirated (NA) Engines.Every 17,000 L (4,500 gal) of Fuel or 500 Service Hours (NA Only)*
Scheduled Oil Sampling (S O S) - Obtain Sample Engine Oil and Filter(s) - Change Crankcase Breather - Clean Engine Valve Lash (Between First 500 and 1000 Service Hours Only) - Check/AdjustEvery 34,000 L (9,000 gal) of Fuel or 1000 Service Hours*
Engine Protection Devices - Inspect SR4 Generator and Control Panel - Inspect Fuel Control Linkage - LubricateEvery 67,000 L (18,000 gal) of Fuel or 2000 Service Hours*
Engine Valve Lash, Valve Rotators, Fuel Ratio Control, Set Point, and Low Idle - Check/Adjust Fuel Injection Nozzles - Test/Clean/Replace Turbocharger - Inspect Engine Mounts - Inspect Crankshaft Vibration Damper - Inspect SR4 Generator - Check/Inspect Clean/LubricateEvery 91,000 L (24,000 gal) of Fuel or 3000 Service Hours or Two Years*
Cooling System - Add Extender (Extended Life Coolant Only) - Cooling System - Drain/Clean/Replace Coolant - Conventional Coolant/Antifreeze Only Water Pump Seal - Inspect/Replace Hoses - Replace Thermostat - ReplaceEvery 136,000 L (36,000 gal) of Fuel or 4000 Service Hours*
Magnetic Pickup - Inspect/Clean SR4 Generator - Check/Inspect/Clean/LubricateEvery 204,000 L (54,000 gal) of Fuel or 6,000 Service Hours or Four Years
Cooling System - Drain/Flush/Replace Coolant (Extended Life Coolant Only)*Perform previous maintenance interval items first.