Information pump assy, injecti
Nozzle:
0935000070
Rating:
KIT List:
| Body assy, injecti | 1904400360 |
| Governor assy, inj | 1908900260 |
Components :
| 001. | PUMP ASSY, INJECTI | 09000-07960 |
| 002. | BODY ASSY, INJECTI | 09010-00673 |
| 003. | GOVERNOR ASSY, INJ | 09050-00182 |
| 004. | TIMER ASSY, AUTOMA | 09180-00101 |
| 005. | PUMP ASSY, FUEL FE | 09210-00042 |
| 006. | COUPLING ASSY | 09240-00012 |
Scheme ###:
| 000. | [01] | 09000-07960 | PUMP ASSY, INJECTI | 25700-30120-71 |
| 001. | [01] | 09010-00673 | BODY ASSY, INJECTI | 22120-76020 |
| 002. | [01] | 09050-00182 | GOVERNOR ASSY, INJ | 22310-76012 |
| 003. | [01] | 09210-00042 | PUMP ASSY, FUEL FE | 22510-46010 |
| 004. | [01] | 09180-00101 | TIMER ASSY, AUTOMA | 22610-77020 |
| 005. | [01] | 09243-60010 | COUPLING, INJECTIO | 22632-77020 |
| 006. | [01] | 09240-00012 | COUPLING ASSY | 22630-77020 |
| 012. | [01] | 09001-80010 | COVER, CONTROL RAC | 22116-77020 |
| 013. | [01] | 94913-00050 | KEY, WOODRUFF | 90099-13002 |
| 014. | [01] | 90258-12001 | WASHER, SPRING | 94511-01200 |
| 015. | [01] | 09001-20010 | NUT, TIMER ROUND | 22611-77020 |
| 019. | [03] | 90258-06001 | WASHER, SPRING | 94511-00600 |
| 020. | [03] | 90160-06051 | NUT, HEXAGON | 90092-10101 |
| 021. | [01] | 09006-10011 | COVER, PRIMING PUM | 22511-77020 |
| 023. | [04] | 91518-06161 | BOLT, W/WASHER | 90091-20611 |
| 024. | [01] | 94900-20021 | SCREW, COUNTERSUNK | 90099-00011 |
| 025. | [01] | 09430-00012 | BOX ASSY, ENGINE S | 22340-77051 |
Include in #3:
09000-07960
as PUMP ASSY, INJECTI
Cross reference number
| Part num | Firm num | Firm | Name |
| 09000-07960 | 25700-3012 | PUMP ASSY, INJECTI | |
| 25700-30120-71 | TOYOTA | PUMP ASSY, INJECTI |
Information:
General Information
Fig. 1-Fuel Pump LocationThe fuel transfer pump is located on the right side of the engine as shown on (1, Fig. 1).Removal
Disconnect and plug fuel lines (2, Fig. 1) at pump.Remove attaching hardware.Repair
Airtex Fuel Transfer Pumps
Fig. 2-Airtex Fuel Transfer PumpTo remove or install primer lever, (1, Fig. 2) compress rocker arm lever (2). And pull primer lever out.Further disassembly of the transfer pump is not possible.A.C. Fuel Transfer Pumps
When disassembling, mark pump cover and pump body for easier reassembly.Test all parts for serviceability and replace, if necessary.When assembling the fuel pump, observe the following:
Fig. 3-A.C. Fuel Transfer PumpMake sure diaphragm (1, Fig. 3) is engaged in rocker arm (2).Before installing the pump cover (3), position diaphragm so that it is level by moving rocker arm. Hold lever in this position.Install pump cover and cover screws. However, turn in screws so that they just contact the washers. Operate rocker arm several times, then release with a snap to make sure that diaphragm will not be overstretched when in use. Tighten cover screws in a crosswise pattern.Corona (B.C.D.) Fuel Transfer Pump
When disassembling, mark pump cover and pump body for easier reassembly.
Fig. 4-Diaphragm RemovalDisconnect diaphragm by pressing it against flange (Fig. 4).
Fig. 5-Remove Valve Plate and FilterCarefully remove valve plate with filter from pump cover (Fig. 5).Check all parts for serviceability and replace, if necessary.When assembling the fuel pump, observe the following: Make sure diaphragm is engaged in rocker arm.Before installing the pump cover, position diaphragm so that it is level by moving rocker arm. Hold lever in this position.Install pump cover and cover screws. However, turn in screws so that they just contact the washers.Operate rocker arm several times, then release with a snap to make sure that diaphragm will not be overstretched when in use.Tighten cover screws in a crosswise pattern.Installation
Using a new gasket, attach transfer pump to cylinder block. Connect lines and bleed fuel system.
Fig. 1-Fuel Pump LocationThe fuel transfer pump is located on the right side of the engine as shown on (1, Fig. 1).Removal
Disconnect and plug fuel lines (2, Fig. 1) at pump.Remove attaching hardware.Repair
Airtex Fuel Transfer Pumps
Fig. 2-Airtex Fuel Transfer PumpTo remove or install primer lever, (1, Fig. 2) compress rocker arm lever (2). And pull primer lever out.Further disassembly of the transfer pump is not possible.A.C. Fuel Transfer Pumps
When disassembling, mark pump cover and pump body for easier reassembly.Test all parts for serviceability and replace, if necessary.When assembling the fuel pump, observe the following:
Fig. 3-A.C. Fuel Transfer PumpMake sure diaphragm (1, Fig. 3) is engaged in rocker arm (2).Before installing the pump cover (3), position diaphragm so that it is level by moving rocker arm. Hold lever in this position.Install pump cover and cover screws. However, turn in screws so that they just contact the washers. Operate rocker arm several times, then release with a snap to make sure that diaphragm will not be overstretched when in use. Tighten cover screws in a crosswise pattern.Corona (B.C.D.) Fuel Transfer Pump
When disassembling, mark pump cover and pump body for easier reassembly.
Fig. 4-Diaphragm RemovalDisconnect diaphragm by pressing it against flange (Fig. 4).
Fig. 5-Remove Valve Plate and FilterCarefully remove valve plate with filter from pump cover (Fig. 5).Check all parts for serviceability and replace, if necessary.When assembling the fuel pump, observe the following: Make sure diaphragm is engaged in rocker arm.Before installing the pump cover, position diaphragm so that it is level by moving rocker arm. Hold lever in this position.Install pump cover and cover screws. However, turn in screws so that they just contact the washers.Operate rocker arm several times, then release with a snap to make sure that diaphragm will not be overstretched when in use.Tighten cover screws in a crosswise pattern.Installation
Using a new gasket, attach transfer pump to cylinder block. Connect lines and bleed fuel system.