Information pump assy, injecti
Rating:
Components :
| 001. | PUMP ASSY, INJECTI | 09000-04592 |
| 002. | BODY ASSY, INJECTI | 09010-01630 |
| 003. | TIMER ASSY, AUTOMA | 09180-00192 |
| 004. | PUMP ASSY, FUEL FE | 09210-00372 |
Scheme ###:
| 000. | [01] | 09000-04592 | PUMP ASSY, INJECTI | 30861-40080 |
| 001. | [01] | 09001-20260 | NUT, TIMER ROUND | ME703450 |
| 002. | [01] | 09001-80061 | COVER, CONTROL RAC | ME728161 |
| 004. | [01] | 09010-01630 | BODY ASSY, INJECTI | |
| 005. | [01] | 09180-00192 | TIMER ASSY, AUTOMA | ME021954 |
| 006. | [01] | 94901-50500 | WASHER, SPRING | ME008373 |
| 007. | [01] | 91518-08221 | BOLT, W/WASHER | MM500963 |
| 008. | [01] | 09080-01802 | GOVERNOR ASSY, MEC | |
| 009. | [01] | 09210-00372 | PUMP ASSY, FUEL FE | ME02082701 |
| 010. | [01] | 94913-00160 | KEY, WOODRUFF | ME022425 |
| 011. | [06] | 94900-50191 | SCREW, SLOTTED FLA | ME022439 |
Include in #3:
09000-04592
as PUMP ASSY, INJECTI
Cross reference number
| Part num | Firm num | Firm | Name |
| 09000-04592 | 30861-4008 | PUMP ASSY, INJECTI |
Information:
C4.236 Engines(1) First (top) compression ring: Width of compression ring ... wedge shapedClearance between ends of ring installed in cylinder liner that has no wear ... 0.25 to 0.61 mm (.010 to .024 in)(2) Second compression ring: Width of compression ring ... 2.362 to 2.375 mm (.0930 to .0935 in)Clearance between ends of each ring installed in cylinder liner that has no wear ... 0.25 to 0.69 mm (.010 to .027 in)(3) Oil ring: Width of oil ring ... 4.724 to 4.763 mm (.1860 to .1875 in)Clearance between ends of each ring installed in cylinder liner that has no wear ... 0.25 to 0.79 mm (.010 to .031 in)(4) Width of groove for first compression ring ... tapered(5) Width of groove for second compression ring ... 2.426 to 2.446 mm (.0955 to .0963 in) Ring clearance in the groove ... 0.051 to 0.084 mm (.0020 to .0033 in)(6) Width of groove for oil ring ... 4.788 to 4.808 mm (.1885 to .1893 in) Ring clearance in the groove ... 0.025 to 0.084 mm (.0010 to .0033 in)(7) Bore in piston for pin ... 38.100 to 38.1005 mm (1.5000 to 1.50002 in) Diameter of piston pin (new) ... 38.095 to 38.100 mm (1.4998 to 1.5000 in)Piston height above cylinder block (not shown) ... 0.36 to 0.58 mm (.014 to .023 in)