Information pump assy, injecti
Rating:
Components :
| 001. | PUMP ASSY, INJECTI | 09000-00622 |
| 002. | BODY ASSY, INJECTI | 09010-00673 |
| 003. | TIMER ASSY, AUTOMA | 09180-00101 |
| 004. | PUMP ASSY, FUEL FE | 09210-00042 |
| 005. | COUPLING ASSY | 09240-00161 |
Scheme ###:
| 000. | [01] | 09000-00622 | PUMP ASSY, INJECTI | 22100-76020 |
| 001. | [01] | 09010-00673 | BODY ASSY, INJECTI | 22120-76020 |
| 002. | [01] | 09050-00062 | GOVERNOR ASSY, INJ | 22310-76021 |
| 003. | [01] | 09210-00042 | PUMP ASSY, FUEL FE | 22510-46010 |
| 004. | [01] | 09180-00101 | TIMER ASSY, AUTOMA | 22610-77020 |
| 005. | [01] | 09243-60020 | COUPLING, INJECTIO | 22632-66010 |
| 006. | [01] | 09240-00161 | COUPLING ASSY | 22630-77051 |
| 012. | [01] | 09001-80010 | COVER, CONTROL RAC | 22116-77020 |
| 013. | [01] | 94913-00050 | KEY, WOODRUFF | 90099-13002 |
| 014. | [01] | 90258-12001 | WASHER, SPRING | 94511-01200 |
| 015. | [01] | 09001-20010 | NUT, TIMER ROUND | 22611-77020 |
| 019. | [04] | 91518-06161 | BOLT, W/WASHER | 90091-20611 |
| 020. | [01] | 91518-08221 | BOLT, W/WASHER | 90091-20804 |
| 021. | [03] | 90258-06001 | WASHER, SPRING | 94511-00600 |
| 022. | [03] | 90170-06551 | NUT, HEXAGON | 90031-70082 |
| 023. | [01] | 09430-00012 | BOX ASSY, ENGINE S | 22340-77051 |
Include in #3:
09000-00622
as PUMP ASSY, INJECTI
Cross reference number
| Part num | Firm num | Firm | Name |
| 09000-00622 | 22100-7602 | PUMP ASSY, INJECTI |
Information:
Nominal Bore (4.2482 and 4.248) ... 3.975 in(100,96 mm) *Nominal Bore (T4.236, 4.236 and 4.212) ... 3.875 in(98,43 mm) *Stroke (4.2482, 4.248, T4.236 and 4.236) ... 5 in(127 mm)Stroke (4.212) ... 4.5 in(114,3 mm)No. of Cylinders ... FourCubic Capacity (4.2482 and 4.248) ... 248 in3(4,06 litres)Cubic Capacity (T4.236 and 4.236) ... 236 in3(3,86 litres)Cubic Capacity (4.212) ... 212 in3(3,47 litres)Compression Ratio (4.2482) ... 18:1Compression Ratio (4.236 - LC Piston with 5 rings) ... 16:1Compression Ratio (4.236 - HC Piston with 3 rings) ... 18:1Compression Ratio (T4.236) ... 15.5:1Compression Ratio (4.248) ... 16:1Compression Ratio (4.212 - HC Piston with 3 rings) ... 17.5:1Compression Ratio (A4.212 - LC Piston with 4 rings) ... 15.5:1Direction of Engine Rotation ... Clockwise from the FrontFiring Order ... 1, 3, 4, 2Cycle ... Four-StrokeCombustion System ... Direct InjectionLubricating Oil Pressure ... 30/60 lbf/in2 (2,1/4,2 kgf/cm2) or 207/414 kN/m2 at max engine speed and normal working temperature.*Nominal -for actual bore size, see pages B.3 and B.4On A4.212 engines, the HC piston with 3 rings was fitted to MF engines from Nos. 212UA87001 to 212UA147672.Details of Maximum Gross Ratings
4.2482 Engines
General ... 60 kW (80 bhp) at 2,600 rev/minMaximum Torque ... 265 Nm (195 lbf ft) at 1,400 rev/minHeavy Duty ... 54 kW (72.5 bhp) at 2,600 rev/minMaximum Torque ... 238 Nm (176 lbf ft) at 1,400 rev/min4.248 Engines
General Agricultural and Industrial ... 62 kW (84 bhp) at 2500 rev/minMaximum Torque ... 263 Nm (194 lbf ft) at 1400 rev/minHeavy Duty Agricultural and Industrial ... 58 kW (78.5 bhp) at 2200 rev/minMaximum Torque ... 279 Nm (206 lbf ft) at 1400 rev/minT4.236 Engines
General ... 76 kw (102 bhp) at 2,600 rev/minMaximum Torque ... 337 Nm (250 lbf ft) at 1,600 rev/minHeavy Duty ... 67 kW (90 bhp) at 2,500 rev/minMaximum Torque ... 324 Nm (240 lbf ft) at 1,400 rev/min4.236 Engines
Vehicle ... 61 kW (82 bhp) at 2800 rev/minMaximum Torque ... 256 Nm (194 lbf ft) at 1450 rev/minGeneral Agricultural and Industrial ... 60 kW 81 bhp at 2600 rev/minMaximum Torque ... 267 Nm (197 lbf ft) at 1350 rev/minHeavy Duty Agricultural and Industrial ... 54 kW (72 bhp) at 2200 rev/minMaximum Torque ... 272 Nm (201 lbf ft) at 1400 rev/min4.212 Engines
Agricultural ... 46 kW (62 bhp) at 2200 rev/minMaximum Torque ... 229 Nm (169 lbf ft) at 1350 rev/minEngine Weights
Typical dry weight ... 590 lb(269 kg)Typical installed weight ... 750/900 lb(340/409 kg)All the above ratings are maximum and can vary according to application. For details of individual ratings, apply to your nearest Perkins Distributor.De-Rating for Altitude
Where engines operate at high altitudes they should be de-rated. The following table is given as a general guide for naturally aspirated engines to be applied on a percentage basis, where specific figures for a particular engine rating are not available. Any necessary adjustments in this respect to the fuel pump should be carried out by the C.A.V. dealer for the territory concerned.For turbocharged engines and any further information apply to Perkins Engines Ltd., Peterborough, or to Overseas Companies listed
4.2482 Engines
General ... 60 kW (80 bhp) at 2,600 rev/minMaximum Torque ... 265 Nm (195 lbf ft) at 1,400 rev/minHeavy Duty ... 54 kW (72.5 bhp) at 2,600 rev/minMaximum Torque ... 238 Nm (176 lbf ft) at 1,400 rev/min4.248 Engines
General Agricultural and Industrial ... 62 kW (84 bhp) at 2500 rev/minMaximum Torque ... 263 Nm (194 lbf ft) at 1400 rev/minHeavy Duty Agricultural and Industrial ... 58 kW (78.5 bhp) at 2200 rev/minMaximum Torque ... 279 Nm (206 lbf ft) at 1400 rev/minT4.236 Engines
General ... 76 kw (102 bhp) at 2,600 rev/minMaximum Torque ... 337 Nm (250 lbf ft) at 1,600 rev/minHeavy Duty ... 67 kW (90 bhp) at 2,500 rev/minMaximum Torque ... 324 Nm (240 lbf ft) at 1,400 rev/min4.236 Engines
Vehicle ... 61 kW (82 bhp) at 2800 rev/minMaximum Torque ... 256 Nm (194 lbf ft) at 1450 rev/minGeneral Agricultural and Industrial ... 60 kW 81 bhp at 2600 rev/minMaximum Torque ... 267 Nm (197 lbf ft) at 1350 rev/minHeavy Duty Agricultural and Industrial ... 54 kW (72 bhp) at 2200 rev/minMaximum Torque ... 272 Nm (201 lbf ft) at 1400 rev/min4.212 Engines
Agricultural ... 46 kW (62 bhp) at 2200 rev/minMaximum Torque ... 229 Nm (169 lbf ft) at 1350 rev/minEngine Weights
Typical dry weight ... 590 lb(269 kg)Typical installed weight ... 750/900 lb(340/409 kg)All the above ratings are maximum and can vary according to application. For details of individual ratings, apply to your nearest Perkins Distributor.De-Rating for Altitude
Where engines operate at high altitudes they should be de-rated. The following table is given as a general guide for naturally aspirated engines to be applied on a percentage basis, where specific figures for a particular engine rating are not available. Any necessary adjustments in this respect to the fuel pump should be carried out by the C.A.V. dealer for the territory concerned.For turbocharged engines and any further information apply to Perkins Engines Ltd., Peterborough, or to Overseas Companies listed