Information coupling plate
BOSCH
9 423 617 867
9423617867
ZEXEL
156637-8820
1566378820
ISUZU
1157801940
1157801940

Rating:
Scheme ###:
1. | [1] | 156636-9000 | COUPLING PLATE |
2. | [1] | 156221-4200 | TOOTHED GEAR |
3. | [6] | 139006-4300 | BLEEDER SCREW |
4. | [1] | 029321-4010 | LOCKING WASHER |
5. | [1] | 156617-3000 | UNION NUT |
6. | [1] | 156210-3500 | LOCKING LEVER |
7. | [1] | 156213-1200 | ADAPTOR |
Cross reference number
Zexel num
Bosch num
Firm num
Name
156637-8820
9 423 617 867
1157801940 ISUZU
COUPLING PLATE
K
K
Information:
Engine Crankshaft Will Not Turn
Possible Causes/Corrections Low Or No Battery VoltageCheck battery voltage. If battery voltage is less than 8 volts for a 12 volt system, or 16 volts for a 24 volt system, put a charge to the battery. If battery will not hold a charge, load test the battery as shown in the Electrical System of the Testing and Adjusting Section of this Service Manual. Defective Switch, Defective Wiring Or Connection In Switch CircuitWith ignition switch in START position, check voltage at switch connection on starter solenoid. If there is no voltage, or if the voltage is low at this connection, check wiring, connections, ignition switch, and magnetic switch (if used). Defective Cable Or Connection; Battery To StarterWith ignition switch in the START position, check voltage at connection of battery cable to starter. If there is no voltage, or if the voltage is low at this connection and there is good voltage at the battery, check for defective cable or connection between the
Possible Causes/Corrections Low Or No Battery VoltageCheck battery voltage. If battery voltage is less than 8 volts for a 12 volt system, or 16 volts for a 24 volt system, put a charge to the battery. If battery will not hold a charge, load test the battery as shown in the Electrical System of the Testing and Adjusting Section of this Service Manual. Defective Switch, Defective Wiring Or Connection In Switch CircuitWith ignition switch in START position, check voltage at switch connection on starter solenoid. If there is no voltage, or if the voltage is low at this connection, check wiring, connections, ignition switch, and magnetic switch (if used). Defective Cable Or Connection; Battery To StarterWith ignition switch in the START position, check voltage at connection of battery cable to starter. If there is no voltage, or if the voltage is low at this connection and there is good voltage at the battery, check for defective cable or connection between the
Have questions with 156637-8820?
Group cross 156637-8820 ZEXEL
Isuzu
156637-8820
9 423 617 867
1157801940
COUPLING PLATE