105664-2640 ZEXEL 9 423 618 554 BOSCH COUPLING PLATE 9423618554 1056642640


 

Information coupling plate

BOSCH 9 423 618 554 9423618554
ZEXEL 105664-2640 1056642640
105664-2640 COUPLING PLATE
Rating:
69
Buy COUPLING PLATE 105664-2640 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 156632-7700 COUPLING PLATE
2. [2] 156634-2900 BLEEDER SCREW
4. [1] 156605-4320 PLATE
6. [2] 156617-3300 UNION NUT
7. [2] 156633-4900 BLEEDER SCREW
11. [1] 156628-1100 COUPLING
12. [2] 156633-4900 BLEEDER SCREW
16. [1] 156605-4320 PLATE
17. [2] 156633-4900 BLEEDER SCREW
21. [1] 156634-2100 BLEEDER SCREW
22. [1] 156615-2600 PLAIN WASHER

Include in #1:

106684-4511 as COUPLING PLATE

Cross reference number

Zexel num
Bosch num
Firm num
Name
105664-2640 
9 423 618 554 
   
COUPLING PLATE
K




Information:


Oil Filters (1), Crankcase Drain (2), Oil Filler (3), Oil Level Gauge (4), Fuel Filters & Priming Pump (5), Air Cleaner with Service Indicator (6), Aftercooler (7), Turbochargers (8), Crankcase Breather with Element (9), Alternator (10), Electronic Governing/Control Module (11), Primary Fuel Filter (12), Oil Cooler (13), Magnetic Speed Sensor (14), Jacket Water Pump (15), Jacket Water Heater (16), Fumes Disposal Drain (17), Ether Canister Bracket (18), Starting Motor (19) and Cooling System Drain (20).
Main Control (GSC) Panel (21), Emergency Stop Pushbutton (22), Engine Control Switch (23), Alarm Module (24).Engine Description
Caterpillar 3412 Generator Set Engines are 27 liter (1649 cu. in.), 137 mm (5.4 in.) bore and 152.4 mm (6.0 in.) stroke, four cycle, 12 cylinder, 65 degree vee diesel design. The engine is available in twin turbocharged or series turbocharged arrangements with jacket water aftercooling and direct fuel injection.The engine and components are designed for high power output. The reduced size and weight plus increased fuel economy provide maximum performance and lower cost per unit of power. The 3412 Generator Set is offered at 1500 rpm, 50 Hz and 1800 rpm, 60 Hz arrangements with various output power ratings. Contact your Caterpillar dealer for information on these power ratings.Larger diameter plungers and a higher injection rate camshaft are incorporated in the valve train/fuel system. The fuel lines are made of high strength steel and the ends of the lines have collared washers to increase reliability. The cooling system has a gear driven centrifugal water pump, two thermostats (one for each bank) which regulate engine coolant temperature, and an oil cooler.The engine lubricating oil, which is both cooled and filtered, is supplied by a gear driven pump. Bypass valves provide unrestricted flow of lubrication oil to engine parts when oil viscosity is high, or either the oil cooler or oil filter elements should become plugged.The 3412 Generator Set Engine is electronically governed and features an exclusive electronic Engine Control Module (ECM). The ECM is a microprocessor-based system that provides full range isochronous speed governing which can operate in speed droop with a zero to ten percent adjustment range.The ECM also provides a cold mode starting strategy, air to fuel ratio control for transient smoke limiting, automatic turbocharger boost pressure and rack position sensor calibration, engine protection and diagnostics.The 3412 engines are equipped with the Electronic Modular Control Panel (EMCP II). The EMCP II is the next generation of engine/generator controls for more accurate, reliable monitoring of engine operating parameters and generator AC voltage metering.The SR4 generator features single bearing, wye connected, brushless, permanent magnet excited designed to match the output characteristics of the engine. These packaged generator sets are designed, manufactured and tested in accordance with ISO 9001 to ensure the highest possible quality on a worldwide basis.Engine efficiency and engine performance and efficiency of emissions controls depend on adherence to proper operation and maintenance recommendations, and the use of recommended fuels, coolants and lubrication oils. To minimize expenses and provide maximum utilization and performance of your

Have questions with 105664-2640?





Group cross 105664-2640 ZEXEL

Isuzu 

9 423 618 455 
1157801860 
COUPLING PLATE

Yanmar 

9 423 618 626 
12788154990 
COUPLING PLATE

Nissan-Diesel 

9 423 618 537 
16820Z9007 
COUPLING PLATE

Hino 

9 423 618 538 
226002590A 
COUPLING PLATE
9 423 618 538 
S226002590 
COUPLING PLATE
9 423 618 538 
S226002590A 
COUPLING PLATE
105664-2640  
9 423 618 554 
 
COUPLING PLATE

Nissan-Diesel 

9 423 618 561 
16820NB000 
COUPLING PLATE

Isuzu 

9 423 618 832 
8980012510 
COUPLING PLATE
9 423 618 799 
8980122420 
COUPLING PLATE
Back to top