105663-0220 ZEXEL 9 423 617 191 BOSCH COUPLING PLATE 9423617191 1056630220 1157800351

Lubricant Information
Certain abbreviations follow S.A.E. J754 nomenclature and some classifications follow S.A.E. J183 abbreviations. SPC is a Caterpillar designation for special synthetic oils, that do not contain viscosity improvers. The MIL specifications are U.S.A. Military Specifications. The definitions other than Caterpillar's will be of assistance in purchasing lubricants. The recommended oil viscosities can be found in the"Lubricant Viscosities" chart in this publication.The grease is classified by the National Lubricating Grease Institute (NLGI) based on the ASTM D217-68 Worked Penetration characteristics which are given a defined consistency number.Engine Lubricant Specification
Caterpillar has an oil formulation to provide maximum performance and life in your truck engine.Engine Oil (EO)
Cat Engine Oil (EO) is a lubricant that meets the performance requirements of today's newer truck engines as well as meeting the needs of earlier built truck engines. This oil has sufficient TBN and sulfated ash level to be effective in operation.* Cat Engine Oil (EO)This lubricating oil also meets the industry standards for both diesel and gasoline engine requirements.Cat Engine Oil is Caterpillar's recommendation for an engine oil specifically intended for use in mixed fleets. This oil is only for the convenience of having the same oil for gasoline and diesel engines.Alternate Oils
Failure to follow these recommendations for CE performance oils can cause shortened engine life due to carbon deposits or excessive wear.
If an oil other than Cat oil is to be used, the following oil specifications provide selection guidelines.If circumstances require the use of an oil other than the Cat Engine Oil, the following oil specifications can be used; API specification CE, CE/SF or CE/SG.Oil with these specifications may require shortened oil change periods as determined by close monitoring of oil condition with Scheduled Oil Sampling (S O S) and infrared analysis.Additional Notes
The percentage of sulfur in the fuel will affect the engine oil recommendations. For fuel sulfur effects, the Infrared Analysis and the ASTM D2896 procedure can be used to evaluate the residual neutralization properties of an engine oil. The sulfur products formation depends on the fuel sulfur content, oil formulation, crankcase blowby, engine operating conditions and ambient temperature.The Caterpillar 20 times rule for TBN versus fuel sulfur is a general requirement, but it can be modified by used oil analysis. The effectiveness of an oil formulation will depend on the additive package. A balanced additive package oil of a lower TBN can be as effective in fuel sulfur neutralization and overall performance as some oils with higher TBN values which have additives just for increased TBN. The used oil analysis can show these results.Consult the EMA Lubricating Oils Data Book, form SEBU6310 for a listing of oil brands meeting the CE requirements.For more information on oil and fuel sulfur content, refer to "Oil and Your Engine," form SEBD0640.Always consult with your Caterpillar dealer for the latest lubrication recommendations.Anti-Seize Compound (ASC)
Use 5P3931 Anti-Seize Compound (ASC) or equivalent.Cat Lubricating Grease
Caterpillar has greases for all applications.Cat Multipurpose Lithium Grease (MPGL) (non-extreme pressure)This NLGI No. 2 grade is recommended for light duty automotive type