105661-0590 ZEXEL 9 423 618 566 BOSCH COUPLING PLATE 9423618566 1056610590 6301713610


 

Information coupling plate

BOSCH 9 423 618 566 9423618566
ZEXEL 105661-0590 1056610590
KOMATSU 6301713610 6301713610
105661-0590 COUPLING PLATE
Rating:
67
Buy COUPLING PLATE 105661-0590 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105661-0590 
9 423 618 566 
6301713610  KOMATSU
COUPLING PLATE
* K 14GT COUPLING COUP




Information:

The problems in this section are problems that do come about and are normally called "low power." These problems are not necessarily more common than engine problems, but they are possible problems which you need to read and check before an engine is disassembled.Read all of the items but make sure the first three are checked completely before making any engine test.Possible Causes/Corrections
Tachometer Error/To check, connect a tachometer of known accuracy to the engine. Run the engine and make a comparison of the readings of the vehicle and test tachometers. If vehicle tachometer is bad, make repairs as necessary or install a new tachometer. Engine Operated at High Altitude/Less oxygen at higher altitudes causes the engine horsepower to go down. There is no effect on the horsepower of the engine for the first 2280 m (7500 ft.) above sea level of operation. Brakes Do Not Completely Release/Check the brakes by feeling all the brake drums. If the brakes of a wheel do not completely release, the brake drum for that wheel will be hotter than the brake drums for the other wheels. With the truck lifted with a jack, the wheels must have free rotation when turned by hand. Extra Engine Driven Equipment/Air compressors, hydraulic pumps, alternator, and other engine driven equipment that has damage, or that was not installed correctly, or that is not in correct adjustment, can take more horsepower to drive than expected. If necessary, disconnect the equipment and test the engine. Speedometer Error/A bad speedometer does not give the correct speed or the correct indication of fuel consumption. An indication of low speed can cause the operator to feel that he has a power problem. Speeds Too High/The need for more horsepower is easy to see as the speed of the vehicle is increased. This is especially true if the front of the vehicle has a large surface area. Application personnel can give you the horsepower necessary for different vehicle designs at different speeds. Overload on Vehicle/Application personnel can give you the horsepower needs for different vehicles. High Moving Resistance/Soft ground conditions cause a need for more horsepower. To see if the problem is the engine, test the vehicle on a surface known to be good, or test on a chassis dynamometer. High Wind Resistance/The horsepower needs for a truck can be divided into two parts. Part of the horsepower is used to move the vehicle and part is used to get through the resistance of the wind. The horsepower necessary to get through the resistance of the wind will increase as the vehicle is used at higher speeds. Vehicles with large front area have a higher wind resistance and take more horsepower than those with a small front area. Some types of trucks, for example those used for the transportation of automobiles and/or boats have high wind resistance even if the front area is small. Moving against the wind has the same effect on wind resistance as does higher vehicle speed. Power Loss

Have questions with 105661-0590?





Group cross 105661-0590 ZEXEL

9 423 618 762 
 
COUPLING PLATE

Nissan-Diesel 

9 423 617 811 
1682095004 
COUPLING PLATE
9 423 617 474 
1682095007 
COUPLING PLATE
9 423 618 041 
 
COUPLING PLATE

Nissan-Diesel 

9 423 617 949 
1682095005 
COUPLING PLATE

Isuzu 

 
1157801040 
COUPLING PLATE
9 423 618 565 
1157801041 
COUPLING PLATE
 
5157800021 
COUPLING PLATE
9 423 618 254 
1157800022 
COUPLING PLATE
9 423 618 254 
5157800022 
COUPLING PLATE
9 423 618 902 
 
COUPLING PLATE
 
 

Komatsu 

105661-0590  
9 423 618 566 
6301713610 
COUPLING PLATE
Back to top