Information control unit
BOSCH
F 01G 090 1BX
f01g0901bx
ZEXEL
407915-2601
4079152601
ISUZU
1815107200
1815107200

Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$980.00
12 Jul 2022
CN: Guangzhou Wansheng T
JISION Controller for KRH1436 KRH1573 1815107200 KRH1436 Zexel Engine Controller for Suminoto SH200A3 6BG1T 1-81510720-0 KRH1436
Tuklye A. Once your payment is confirmed, we will arrange the goods within 1~4 days; if not in stock, we will inform you before placing the order?
Tuklye A. Once your payment is confirmed, we will arrange the goods within 1~4 days; if not in stock, we will inform you before placing the order?
Cross reference number
Zexel num
Bosch num
Firm num
Name
407915-2601
F 01G 090 1BX
1815107200 ISUZU
CONTROL UNIT
C 74PD CONTROL UNIT C/U N-RED3 C/U PE
C 74PD CONTROL UNIT C/U N-RED3 C/U PE
407915-2601
F 01G 09P 190
CONTROL UNIT
74PD CONTROL UNIT C/U N-RED3 C/U PE
74PD CONTROL UNIT C/U N-RED3 C/U PE
Information:
GENERAL
1. Schematic
Schematic2. Specifications INSPECTION
1. Oil pumpVisually check the pump for rough rotation or other defects. Replace the pump assembly if defective.
Checking oil pump2. Oil pressure switch (1) Test for continuity between the terminal and body with an ohmmeter as shown in the illustration. No continuity is the cause for replacing the switch.
Testing oil pressure switch (1)(2) Insert a small diameter bar into the oil hole in the switch and lightly push it in to test for no continuity as shown in the illustration. Any continuity is the cause for replacing the switch.(3) Apply a pressure air of 0.5 kgf/cm2 (7 psi) [49 kPa] to the switch through the oil hole to test for no continuity. Any continuity is the cause for replacing the switch. Also, check for air leaks. Any air leak is an indication of a ruptured diaphragm. In such a case, replace the switch.
Testing oil pressure switch (2)3. Pressure relief valve (1) Check the valve seat for contact. Check the spring for damage.(2) Measure the oil pressure at which the relief valve opens (the oil pressure with the engine running at the rated rpm). If the pressure is not correct, remove the cap nut and increase or decrease the amount of shims. The engine oil pressure tap is located on the right side of the engine.
Checking pressure relief valve
1. Schematic
Schematic2. Specifications INSPECTION
1. Oil pumpVisually check the pump for rough rotation or other defects. Replace the pump assembly if defective.
Checking oil pump2. Oil pressure switch (1) Test for continuity between the terminal and body with an ohmmeter as shown in the illustration. No continuity is the cause for replacing the switch.
Testing oil pressure switch (1)(2) Insert a small diameter bar into the oil hole in the switch and lightly push it in to test for no continuity as shown in the illustration. Any continuity is the cause for replacing the switch.(3) Apply a pressure air of 0.5 kgf/cm2 (7 psi) [49 kPa] to the switch through the oil hole to test for no continuity. Any continuity is the cause for replacing the switch. Also, check for air leaks. Any air leak is an indication of a ruptured diaphragm. In such a case, replace the switch.
Testing oil pressure switch (2)3. Pressure relief valve (1) Check the valve seat for contact. Check the spring for damage.(2) Measure the oil pressure at which the relief valve opens (the oil pressure with the engine running at the rated rpm). If the pressure is not correct, remove the cap nut and increase or decrease the amount of shims. The engine oil pressure tap is located on the right side of the engine.
Checking pressure relief valve
Have questions with 407915-2601?
Group cross 407915-2601 ZEXEL
Isuzu
407915-2601
F 01G 090 1BX
1815107200
CONTROL UNIT
407915-2601
F 01G 09P 190
CONTROL UNIT