Information control lever
BOSCH
9 461 611 760
9461611760
ZEXEL
146535-3300
1465353300
ISUZU
8944421810
8944421810
Rating:
Include in ###:
Number on scheme 67/5
1047401810
as CONTROL LEVER
1047496720
as CONTROL LEVER
'533'
1047496731
as CONTROL LEVER
1047496741
as CONTROL LEVER
STAMP 533
1047496760
as CONTROL LEVER
Cross reference number
Zexel num
Bosch num
Firm num
Name
146535-3300
9 461 611 760
8944421810 ISUZU
CONTROL LEVER
C 11FV LEVER parts(VE) Others
C 11FV LEVER parts(VE) Others
Information:
Introduction
The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
In order to extend the life of fuel injectors on the above listed engines, the injector solenoids need to remain cool.Solution
Illustration 1 g01404067
Hole in exhaust rocker arm for oil sprayThe system was developed in order to provide a stream of engine oil to the injector solenoids. The design uses the existing oil supply from the valve mechanism. The oil spray is directed out of the exhaust rocker arms. There is one 0.7 mm (0.028 inch) hole (1) in each exhaust rocker arm.Note: When you are servicing the valve mechanism, the oil ports must remain free of debris.
Illustration 2 g01404069
(2) Location of oil spray
The problem that is identified in the technical information bulletin that follows does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
In order to extend the life of fuel injectors on the above listed engines, the injector solenoids need to remain cool.Solution
Illustration 1 g01404067
Hole in exhaust rocker arm for oil sprayThe system was developed in order to provide a stream of engine oil to the injector solenoids. The design uses the existing oil supply from the valve mechanism. The oil spray is directed out of the exhaust rocker arms. There is one 0.7 mm (0.028 inch) hole (1) in each exhaust rocker arm.Note: When you are servicing the valve mechanism, the oil ports must remain free of debris.
Illustration 2 g01404069
(2) Location of oil spray
Have questions with 146535-3300?
Group cross 146535-3300 ZEXEL
Isuzu
146535-3300
9 461 611 760
8944421810
CONTROL LEVER