Information control lever
BOSCH
9 461 614 094
9461614094
ZEXEL
146535-2001
1465352001
ISUZU
8944430561
8944430561

Rating:
Include in ###:
Number on scheme 67/5B
1047411251
as CONTROL LEVER
1047416410
as CONTROL LEVER
STAMP 520A
1047416421
as CONTROL LEVER
1047416450
as CONTROL LEVER
STAMP 520A
1047416460
as CONTROL LEVER
1047417281
as CONTROL LEVER
STAMP 520A
1047417370
as CONTROL LEVER
1047461060
as CONTROL LEVER
STAMP 520A
1047461070
as CONTROL LEVER
1047466380
as CONTROL LEVER
STAMP 520A
1047466630
as CONTROL LEVER
1047466670
as CONTROL LEVER
STAMP 520A
Cross reference number
Zexel num
Bosch num
Firm num
Name
146535-2001
9 461 614 094
8944430561 ISUZU
CONTROL LEVER
C 11FV LEVER parts(VE) Others
C 11FV LEVER parts(VE) Others
Information:
Lower - To drop to a reduced energy position. To reduce the level of material in a container. To cause to descend.
Loosen - To make less tight. To set free. To release.
Measure - To determine the dimension, area, volume, or other quantifiable property of an object. A desired quantity of something.
Open - To unseal or get access to.
Operation and Maintenance Manual - Refer to a procedure in the Operation and Maintenance Manual.
Position - To locate to the desired or intended location.
Relieve - To eliminate the pressure or force on a part or system to reduce a pressure, load, or weight on a device.
Remove - To take off.
Replace - To put back in place.
Rotate - Counter Clockwise - To turn on an axis. To alternate position or orientation, for the purpose of achieving even wear.
Tighten - To make nearer, to fully stretch, without slack, or to apply tension or torque.Machine Preparation
Illustration 2 g06181614
Illustration 3 g06181622
Illustration 4 g06303840
Refer to the Operation and Maintenance Manual , Machine Preparation for Troubleshooting for the machine that is being worked on in order to release system pressure.
Illustration 5 g06181692Location of Rework
Illustration 6 g06287569Rework Procedure
Illustration 7 g06287850
Illustration 8 g06304138
Illustration 9 g06304142
Loosen - To make less tight. To set free. To release.
Measure - To determine the dimension, area, volume, or other quantifiable property of an object. A desired quantity of something.
Open - To unseal or get access to.
Operation and Maintenance Manual - Refer to a procedure in the Operation and Maintenance Manual.
Position - To locate to the desired or intended location.
Relieve - To eliminate the pressure or force on a part or system to reduce a pressure, load, or weight on a device.
Remove - To take off.
Replace - To put back in place.
Rotate - Counter Clockwise - To turn on an axis. To alternate position or orientation, for the purpose of achieving even wear.
Tighten - To make nearer, to fully stretch, without slack, or to apply tension or torque.Machine Preparation
Illustration 2 g06181614
Illustration 3 g06181622
Illustration 4 g06303840
Refer to the Operation and Maintenance Manual , Machine Preparation for Troubleshooting for the machine that is being worked on in order to release system pressure.
Illustration 5 g06181692Location of Rework
Illustration 6 g06287569Rework Procedure
Illustration 7 g06287850
Illustration 8 g06304138
Illustration 9 g06304142
Have questions with 146535-2001?
Group cross 146535-2001 ZEXEL
Isuzu
146535-2001
9 461 614 094
8944430561
CONTROL LEVER