Information control lever
BOSCH
9 461 614 093
9461614093
ZEXEL
146535-1901
1465351901
ISUZU
8944430551
8944430551

Rating:
Include in ###:
Number on scheme 67/5
1047411251
as CONTROL LEVER
1047416410
as CONTROL LEVER
STAMP 519A
1047416421
as CONTROL LEVER
1047416450
as CONTROL LEVER
STAMP 519A
1047416460
as CONTROL LEVER
1047417281
as CONTROL LEVER
STAMP 519A
1047417370
as CONTROL LEVER
1047461060
as CONTROL LEVER
STAMP 519A
1047461070
as CONTROL LEVER
1047466380
as CONTROL LEVER
STAMP 519A
1047466630
as CONTROL LEVER
1047466670
as CONTROL LEVER
STAMP 519A
Cross reference number
Zexel num
Bosch num
Firm num
Name
146535-1901
9 461 614 093
8944430551 ISUZU
CONTROL LEVER
C 11FV LEVER parts(VE) Others
C 11FV LEVER parts(VE) Others
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Note: The standard work for the laser mark has been updated.Problem
Illustration 1 g06273667During laser marking on these Reman 3400 HEUI injectors both Prime and Non-Prime injectors were marked with NP. This caused confusion with dealers and customers. The NP is thought to mean "Non-Prime" and the injectors are Prime injector part numbers. The prime injectors marked incorrectly with NP but were built and tested to the correct Prime part number and should be used in fuel systems for prime injectors. Dealers can remove the two letters if they decide the two letters cause too much confusion.Solution
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Illustration 2 g06273668
Prime HEUI injector
NP stands for "Non-Prime". Going forward only "Non-Prime" 3400 HEUI injectors will have the NP laser mark.
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Note: The standard work for the laser mark has been updated.Problem
Illustration 1 g06273667During laser marking on these Reman 3400 HEUI injectors both Prime and Non-Prime injectors were marked with NP. This caused confusion with dealers and customers. The NP is thought to mean "Non-Prime" and the injectors are Prime injector part numbers. The prime injectors marked incorrectly with NP but were built and tested to the correct Prime part number and should be used in fuel systems for prime injectors. Dealers can remove the two letters if they decide the two letters cause too much confusion.Solution
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Illustration 2 g06273668
Prime HEUI injector
NP stands for "Non-Prime". Going forward only "Non-Prime" 3400 HEUI injectors will have the NP laser mark.
Have questions with 146535-1901?
Group cross 146535-1901 ZEXEL
Isuzu
146535-1901
9 461 614 093
8944430551
CONTROL LEVER