135256-0921 ZEXEL 9 411 616 623 BOSCH CONTROL RACK 9411616623 1352560921 me756299


 

Information control rack

BOSCH 9 411 616 623 9411616623
ZEXEL 135256-0921 1352560921
MITSUBISHI ME756299 me756299
135256-0921 CONTROL RACK
Rating:
65
Buy CONTROL RACK 135256-0921 zexel genuine, new aftermarket engine parts with delivery

Include in ###:

Number on scheme 32
CONTROL RACK
1070691300 as CONTROL RACK

Cross reference number

Zexel num
Bosch num
Firm num
Name
135256-0921 
9 411 616 623 
ME756299  MITSUBISHI
CONTROL RACK
C 14GV CONTROL RACK Others




Information:

Starting From External Electrical Source
Always wear protective glasses when working with batteries.Do not allow the free end of booster cables to make contact with each other or touch the engine. This will help prevent sparks near the batteries.Batteries give off flammable fumes that can explode.Do not smoke when observing the battery electrolyte levels.Electrolyte is an acid and can cause personal injury if it contacts skin or eyes.
Be sure the main power switch is in the OFF position before attaching the booster cables to the engine being started. When using booster cables, be sure to connect in parallel: POSITIVE (+) to POSITIVE (+) and NEGATIVE (-) to NEGATIVE (-).Use only equal voltage for boost starting. The use of a welder or higher voltage will damage the electrical system.
Engines without engine-to-frame ground straps can be damaged by electrical discharge.To prevent electrical discharge damage, check to make sure there is an engine-to-frame ground strap. For engines which have the alternator connected to an engine component, the ground strap must connect that component to the frame.Some engines have starter-to-frame ground straps. But, many of these starters are not electrically grounded to the engine. They have electrical insulation systems. For this reason, the starter-to-frame ground strap may not be an acceptable ground.Connect one end of cable to the POSITIVE (+) (ungrounded) terminal of the battery on the engine being started. Connect the other end to the POSITIVE (+) terminal of the power source.Connect one end of the second cable to the NEGATIVE (-) terminal of the power source. Connect the other end to the frame of the engine to be started.Turn the start switch on and start the engine.Disconnect the cable from the frame first. Disconnect the other end from the NEGATIVE (-) terminal of the power source. Disconnect the cable from the POSITIVE (+) terminal of the battery. Disconnect the other end from the POSITIVE (+) terminal of the power source.

Have questions with 135256-0921?





Group cross 135256-0921 ZEXEL

Mitsubishi 

9 411 612 469 
ME748185 
CONTROL RACK

Nissan-Diesel 

9 411 612 469 
16727Z9003 
CONTROL RACK

Mitsubishi 

135256-0921  
9 411 616 623 
ME756299 
CONTROL RACK
Back to top