146221-2020 ZEXEL 9 461 628 386 BOSCH CAM PLATE 9461628386 1462212020


 

Information cam plate

BOSCH 9 461 628 386 9461628386
ZEXEL 146221-2020 1462212020
146221-2020 CAM PLATE
Rating:
12
Buy CAM PLATE 146221-2020 zexel genuine, new aftermarket engine parts with delivery

Include in ###:

Number on scheme 29
CAM PLATE
1047394000 as CAM PLATE

Cross reference number

Zexel num
Bosch num
Firm num
Name
146221-2020 
9 461 628 386 
   
CAM PLATE
C 11FV CAM DISK parts(VE) Others




Information:


Recommended engine warm-up procedure must be followed. Refer to the engine Operation and Maintenance Manual. Also refer to the relevant “Lubricant Viscosities for Ambient Temperatures” table in this Special Publication.
For easier cold weather starting, ensure that all of the components of the engine electrical system are properly maintained. All electrical wiring and connections should be free of the following: fraying, damaged insulation and corrosion. Batteries should be kept fully charged and warm. The batteries and the battery cables must be sized properly for the application.Various starting aids are available in order to assist with cold engine starts in low temperature conditions. Follow the recommendations that are provided by the manufacturer of the starting aid. Refer to the foreword section of this Special Publication, "Aftermarket Products and Warranty".For additional information concerning cold-weather operation, refer to this Special Publication, "Fuel Specifications" section. Also refer to this Special Publication, "Cooling System Specifications" section.Before attempting to start the engine, ensure that the oil in the engine is fluid enough to flow. Check the oil by removing the dipstick. If the oil will drip from the dipstick, then the oil should be fluid enough to allow the engine to start. Do not use oil that has been diluted with kerosene. Kerosene will evaporate in the engine. and cause the oil to thicken. Kerosene will cause swelling and softening of the silicone seals. Kerosene will dilute the oil additives. Dilution of the oil additives will reduce the performance, and reduce the engine protection that the additives provide.If the viscosity of the oil is changed for colder weather, also change the filter element. If the filter is not changed, the filter element and the filter housing can become a solid mass. After you change the oil, operate the engine in order to circulate the thinner oil.Note: Use the highest oil viscosity grade that is allowed for

Have questions with 146221-2020?





Group cross 146221-2020 ZEXEL

146221-2020  
9 461 628 386 
 
CAM PLATE
Back to top