141001-0600 ZEXEL F 01G 19W 037 BOSCH BUSHING f01g19w037 1410010600 m85040du


 

Information bushing

BOSCH F 01G 19W 037 f01g19w037
ZEXEL 141001-0600 1410010600
ISHIKAWAJIMA-H M85040DU m85040du
141001-0600 BUSHING
Rating:
8
Buy BUSHING 141001-0600 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
141001-0600 
F 01G 19W 037 
M85040DU  ISHIKAWAJIMA-H
BUSHING
A 24XX BUSH PF parts PF
141001-0600 
F 01G 19W 037 
MB50400U  ISHIKAWAJIMA-S
BUSHING
A 24XX BUSH PF parts PF
141001-0600 
F 01G 19W 037 
99512105001  NKK
BUSHING
A 24XX BUSH PF parts PF
141001-0600 
F 01G 19W 037 
MB5040  NIIGATA
BUSHING
A 24XX BUSH PF parts PF




Information:

(1) Bore in the rear bearing for the camshaft (new) ... 60.325 0.013 mm (2.3750 .0005 in) Diameter of rear bearing surface (journal) of the camshaft (new) ... 60.249 0.013 mm (2.3720 .0005 in)Maximum permissible clearance between the bearing and the camshaft bearing surface (journal) (worn) ... 0.15 mm (.006 in)(2) Torque for screws that hold sleeve control levers ... 2.8 0.2 N m (24 2 lb in)(3) Bore in the housing for the fuel control shaft (new) ... 8.999 0.013 mm (.3543 .0005 in) Diameter of sleeve control shaft (new) ... 8.966 0.008 mm (.3530 .0003 in)Maximum permissible clearance between the bore in the housing and the sleeve control shaft (worn) ... 0.08 mm (.003 in)(4) End play for camshaft with sleeve installed (new) ... 0.58 0.46 mm (.023 .018 in) When installing sleeve on end of camshaft, support the camshaft to prevent damage to parts inside of injection pump and governor housing.(5) Bore in the front bearing for the camshaft (new) ... 25.413 0.013 mm (1.0005 .0005 in) Diameter of front bearing surface (journal) of the camshaft (new) ... 25.375 0.013 mm (.9990 .0005 in)Maximum permissible clearance between the bearing and the camshaft bearing surface (journal) (worn) ... 0.10 mm (.004 in) (6) Torque for bushing ... 82 7 N m (60 5 lb ft)(7) Crossover levers. For adjustment of crossover levers, see the Testing And Adjusting Section.(8) Torque for screws that hold crossover levers ... 2.8 0.2 N m (24 2 lb in)(9 and 10) Fuel control shafts.(11) Dowel pin (linkage between crossover levers).(12) Distance guide pin extends into bore ... 1.20 0.10 mm (.047 .004 in) Install guide pin with slot toward the top of the lifter bore.(13) 9N5862 Spring for injection pump: Length under test force ... 35.13 mm (1.383 in)Test force ... 56.7 6.6 N (12.4 1.4 lb)Free length after test ... 40.80 mm (1.606 in)Outside diameter ... 18.49 mm (.728 in)A. Reverse Flow Check Valve (RFC).B. Orificed Delivery Valve (ODV).C. Orificed Delivery Valve-Lo Volume (ODV).D. Orificed Reverse Flow Check Valve (ORFC).

Have questions with 141001-0600?





Group cross 141001-0600 ZEXEL

Ishikawajima-H 

141001-0600  
F 01G 19W 037 
M85040DU 
BUSHING

Ishikawajima-S 

141001-0600  
F 01G 19W 037 
MB50400U 
BUSHING

Nkk 

141001-0600  
F 01G 19W 037 
99512105001 
BUSHING

Niigata 

141001-0600  
F 01G 19W 037 
MB5040 
BUSHING
Back to top