Information bleeder screw
BOSCH
9 442 610 926
9442610926
ZEXEL
010038-9140
0100389140
Rating:
Include in #1:
101606-9910
as Open Pre:MPa(Kqf/cm2)
106671-6450
as Nozzle and Holder
106891-1460
as _
108621-0060
as Open Pre:MPa(Kqf/cm2)
Include in #2:
104135-1000
as Open Pre:MPa(Kqf/cm2)
Include in ###:
Number on scheme 51
1054450130
as BLEEDER SCREW
1054450370
as BLEEDER SCREW
M8P1.25L95
1054550340
as BLEEDER SCREW
1054550350
as BLEEDER SCREW
M8P1.25L95
1054550622
as BLEEDER SCREW
1054550632
as BLEEDER SCREW
M8P1.25L95
1054550741
as BLEEDER SCREW
1054550750
as BLEEDER SCREW
M8P1.25L95
1054551061
as BLEEDER SCREW
1054551071
as BLEEDER SCREW
M8P1.25L95
Cross reference number
Zexel num
Bosch num
Firm num
Name
010038-9140
9 442 610 926
BLEEDER SCREW
D 90HY BOLT Standard parts Others
D 90HY BOLT Standard parts Others
Information:
Introduction
This Special Instruction contains the strap torquing procedure for the straps on the DEF tank.Read the entire Special Instruction. Understand the information before you perform any procedures. Strap Torquing Procedure
Illustration 1 g03354750
(1) Strap (2) Nut
Install strap (1) and torque nut (2) .Torque for nut (2) ... 11 1 N m (97 9 lb in)Note: If the strap has a hook or other non-adjustable fastener on one end, only the adjustment end is torqued during installation.Note: If both ends of the strap have adjustable fasteners, both ends should be torqued only once. Do not go back and forth when applying assembly torque. Torque the first side to specification, then ensure that the torque on the second side is at specifications. Do not go back and retorque the first side.
This Special Instruction contains the strap torquing procedure for the straps on the DEF tank.Read the entire Special Instruction. Understand the information before you perform any procedures. Strap Torquing Procedure
Illustration 1 g03354750
(1) Strap (2) Nut
Install strap (1) and torque nut (2) .Torque for nut (2) ... 11 1 N m (97 9 lb in)Note: If the strap has a hook or other non-adjustable fastener on one end, only the adjustment end is torqued during installation.Note: If both ends of the strap have adjustable fasteners, both ends should be torqued only once. Do not go back and forth when applying assembly torque. Torque the first side to specification, then ensure that the torque on the second side is at specifications. Do not go back and retorque the first side.