Information backup ring
BOSCH
9 442 611 077
9442611077
ZEXEL
016430-0070
0164300070
ISUZU
1156290400
1156290400

Rating:
Include in #1:
106693-1761
as _
Include in #2:
104749-6111
as Nozzle and Holder
Include in ###:
Cross reference number
Zexel num
Bosch num
Firm num
Name
016430-0070
9 442 611 077
1156290400 ISUZU
BACKUP RING
D 90HY BACK UP RING Standard parts Others
D 90HY BACK UP RING Standard parts Others
016430-0070
9 442 611 077
221431170A HINO
BACKUP RING
D 90HY BACK UP RING Standard parts Others
D 90HY BACK UP RING Standard parts Others
016430-0070
9 442 611 077
ME716721 MITSUBISHI
BACKUP RING
D 90HY BACK UP RING Standard parts Others
D 90HY BACK UP RING Standard parts Others
016430-0070
9 442 611 077
1679299000 NISSAN-DIESEL
BACKUP RING
D 90HY BACK UP RING Standard parts Others
D 90HY BACK UP RING Standard parts Others
Information:
Add Coolant Additive (Conditioner)
1. Release the cooling system relief valve slowly to relieve pressure and remove filler cap. Inspect condition of cap gasket. Replace cap if necessary.2. It may be necessary to drain enough coolant from the system to allow for the addition of cooling system additive (conditioner).3. Add Caterpillar Cooling System Conditioner. Add 0.24 liter (1/2 U.S. pint) of Caterpillar Cooling System Additive (Conditioner) for each 38 liter (10 U.S. gallon) of cooling system capacity. This will maintain the required concentration of conditioner. On new, rebuilt or remanufactured engines only, or when draining and changing the coolant, add liquid additive concentration of coolant additive of 1 liter (1 U.S. quart) for every 15 liter (4 U.S. gallon) of cooling system capacity for systems using water as coolant only.Caterpillar Antifreeze contains the necessary coolant additive precharge. Only add the coolant additive precharge if you have decided not to use Caterpillar Antifreeze.Refer to the Refill Capacities chart in this publication for the cooling system capacity for your engine.
Do not use any Methoxypropanol-based antifreeze or coolants such as Dowtherm 209 Full-Fill coolant in the cooling system. Methoxypropanol will cause some seals and gaskets to deteriorate and fail.
4. Maintain coolant level to within 13 mm (1/2 in) below the bottom of the filler tube or to the proper level (upper half) on the sight glass, if equipped. Add premixed coolant if necessary to bring the coolant to the proper level.Refer to the topic Cooling System Specifications in the Specifications section in this manual for additional information about coolant mixture and supplemental coolant additive.5. Start the engine and check for leaks or damaged piping. Allow the coolant level to stabilize. Inspect the cooling system pipes and lines for leaks and/or damaged connections. Make repairs if necessary. Install the filler cap.Coolant Analysis
Obtain Coolant Sample
There are
1. Release the cooling system relief valve slowly to relieve pressure and remove filler cap. Inspect condition of cap gasket. Replace cap if necessary.2. It may be necessary to drain enough coolant from the system to allow for the addition of cooling system additive (conditioner).3. Add Caterpillar Cooling System Conditioner. Add 0.24 liter (1/2 U.S. pint) of Caterpillar Cooling System Additive (Conditioner) for each 38 liter (10 U.S. gallon) of cooling system capacity. This will maintain the required concentration of conditioner. On new, rebuilt or remanufactured engines only, or when draining and changing the coolant, add liquid additive concentration of coolant additive of 1 liter (1 U.S. quart) for every 15 liter (4 U.S. gallon) of cooling system capacity for systems using water as coolant only.Caterpillar Antifreeze contains the necessary coolant additive precharge. Only add the coolant additive precharge if you have decided not to use Caterpillar Antifreeze.Refer to the Refill Capacities chart in this publication for the cooling system capacity for your engine.
Do not use any Methoxypropanol-based antifreeze or coolants such as Dowtherm 209 Full-Fill coolant in the cooling system. Methoxypropanol will cause some seals and gaskets to deteriorate and fail.
4. Maintain coolant level to within 13 mm (1/2 in) below the bottom of the filler tube or to the proper level (upper half) on the sight glass, if equipped. Add premixed coolant if necessary to bring the coolant to the proper level.Refer to the topic Cooling System Specifications in the Specifications section in this manual for additional information about coolant mixture and supplemental coolant additive.5. Start the engine and check for leaks or damaged piping. Allow the coolant level to stabilize. Inspect the cooling system pipes and lines for leaks and/or damaged connections. Make repairs if necessary. Install the filler cap.Coolant Analysis
Obtain Coolant Sample
There are
Have questions with 016430-0070?
Group cross 016430-0070 ZEXEL
Kubota
Isuzu
016430-0070
9 442 611 077
1156290400
BACKUP RING
Hino
016430-0070
9 442 611 077
221431170A
BACKUP RING
Mitsubishi
016430-0070
9 442 611 077
ME716721
BACKUP RING
Nissan-Diesel
016430-0070
9 442 611 077
1679299000
BACKUP RING