Information autom. advance mechanism
BOSCH
9 420 615 336
9420615336
ZEXEL
105680-5020
1056805020
HINO
225004010A
225004010a

Rating:
Scheme ###:
1. | [1] | 156800-2720 | TIMING-DEVICE HOUSING |
2. | [1] | 156801-5900 | FLANGE BUSHING |
3. | [2] | 156723-0300 | ECCENTRIC DISC |
3. | [2] | 156723-0300 | ECCENTRIC DISC |
4. | [2] | 156723-0400 | ECCENTRIC DISC |
4. | [2] | 156723-0400 | ECCENTRIC DISC |
5. | [1] | 156819-5220 | FLYWEIGHT ASSEMBLY |
5/1. | [2] | 156802-5820 | FLYWEIGHT |
5/1. | [2] | 156802-5820 | FLYWEIGHT |
5/2. | [4] | 156877-0500 | SLOTTED WASHER |
5/2. | [4] | 156877-0500 | SLOTTED WASHER |
5/3. | [4] | 156807-1300 | SLOTTED WASHER |
5/3. | [4] | 156807-1300 | SLOTTED WASHER |
5/4. | [4] | 156807-1200 | SLOTTED WASHER |
5/4. | [4] | 156807-1200 | SLOTTED WASHER |
5/5. | [4] | 156894-6500 | COMPRESSION SPRING |
5/5. | [4] | 156894-6500 | COMPRESSION SPRING |
5/6. | [4] | 156894-7000 | COMPRESSION SPRING |
5/6. | [4] | 156894-7000 | COMPRESSION SPRING |
5/7. | [4] | 156729-0500 | LOCKING WASHER |
5/7. | [4] | 156729-0500 | LOCKING WASHER |
5/8. | [2] | 156806-1600 | PIN |
5/9/1. | [0] | 156728-0800 | SHIM D19&15T0.1 |
5/9/1. | [0] | 156728-0900 | SHIM D19&15T0.3 |
5/9/1. | [0] | 156728-0900 | SHIM D19&15T0.3 |
5/9/1. | [0] | 156728-1000 | SHIM D19&15T0.5 |
5/9/1. | [0] | 156728-1100 | SHIM D19&15T1.0 |
5/9/1. | [0] | 156728-2000 | SHIM D19&15T0.4 |
5/9/1. | [0] | 156728-2100 | SHIM D19&15T0.7 |
5/10/1. | [0] | 156728-1200 | SHIM D14&10.6T0.1 |
5/10/1. | [0] | 156728-1300 | SHIM D14&10.6T0.3 |
5/10/1. | [0] | 156728-1400 | SHIM D14&10.6T0.5 |
5/10/1. | [0] | 156728-1400 | SHIM D14&10.6T0.5 |
5/10/1. | [0] | 156728-1500 | SHIM D14&10.6T1.0 |
5/10/1. | [0] | 156728-2200 | SHIM D14&10.6T0.4 |
5/10/1. | [0] | 156728-2300 | SHIM D14&10.6T0.7 |
13. | [1] | 156809-1520 | COVER |
13/2. | [1] | 139648-0300 | PACKING RING |
13/3. | [1] | 156315-0200 | O-RING |
30. | [1] | 156729-1400 | LOCKING WASHER |
31. | [1] | 131325-1800 | UNION NUT |
33. | [1] | 029331-0190 | GASKET D14&10.2T1 |
34. | [1] | 156316-0000 | CAPSULE |
35. | [1] | 156314-0600 | CAP |
36. | [1] | 156319-0200 | GASKET |
Include in #1:
101603-2172
as AUTOM. ADVANCE MECHANIS
Cross reference number
Zexel num
Bosch num
Firm num
Name
105680-5020
225004010A HINO
AUTOM. ADVANCE MECHANISM
K 14KL AUTOMATIC TIMER TIMER SPG TIMER
K 14KL AUTOMATIC TIMER TIMER SPG TIMER
Information:
Environmental
The ambient operating temperature range is from -40° to 70°C (-40° to 158°F).
The storage temperature is from -40° to 85°C (-40° to 185°F).
The unit must be protected from direct contact with liquids. If sealing of the unit is required, the CCM must be in a water tight enclosure.
The CCM weighs 0.75 kg (1.65 lb).Mounting
The CCM can be located on a desk or on a shelf. The rubber feet on the bottom of the CCM can be removed for mounting to a panel.Note: Do not mount the CCM on the engine or within the engine mounted instrument panel. The CCM is not designed for direct engine mounting.Internal Battery
The CCM contains a battery that supplies power for internal memory whenever the CCM is turned off. Refer to the Operation and Maintenance Manual, "Battery - Replace".Power Supply
The requirements for battery voltage are 15 to 45 volts DC (24 or 32 volts DC nominal power).
The +/-B power dissipation is approximately 3.0 watts at 24 volts.
The current drawn by the CCM is 0.11 amps at 12 volts and 0.13 amps at 36 volts.
Multiple engines must share a common ground (-B).
Multiple engines must use diodes to prevent power sharing between units.Dimensions
Illustration 1 g00647099
Table 1
CCM MOUNTING DIMENSIONS    
Item     Dimension    
A    
3.5 mm (0.14 in)    
B    
106.5 mm (4.19 in)    
C    
73.0 mm (2.87 in)    
D    
7.5 mm (0.29 in) diameter holes (4)    
E    
130 mm (5.12 in)    
F    
149.0 mm (5.87 in)    
G    
66.2 mm (2.61 in)    
H    
125.5 mm (4.94 in)    
I    
17.8 mm (.70 in)    
The ambient operating temperature range is from -40° to 70°C (-40° to 158°F).
The storage temperature is from -40° to 85°C (-40° to 185°F).
The unit must be protected from direct contact with liquids. If sealing of the unit is required, the CCM must be in a water tight enclosure.
The CCM weighs 0.75 kg (1.65 lb).Mounting
The CCM can be located on a desk or on a shelf. The rubber feet on the bottom of the CCM can be removed for mounting to a panel.Note: Do not mount the CCM on the engine or within the engine mounted instrument panel. The CCM is not designed for direct engine mounting.Internal Battery
The CCM contains a battery that supplies power for internal memory whenever the CCM is turned off. Refer to the Operation and Maintenance Manual, "Battery - Replace".Power Supply
The requirements for battery voltage are 15 to 45 volts DC (24 or 32 volts DC nominal power).
The +/-B power dissipation is approximately 3.0 watts at 24 volts.
The current drawn by the CCM is 0.11 amps at 12 volts and 0.13 amps at 36 volts.
Multiple engines must share a common ground (-B).
Multiple engines must use diodes to prevent power sharing between units.Dimensions
Illustration 1 g00647099
Table 1
CCM MOUNTING DIMENSIONS    
Item     Dimension    
A    
3.5 mm (0.14 in)    
B    
106.5 mm (4.19 in)    
C    
73.0 mm (2.87 in)    
D    
7.5 mm (0.29 in) diameter holes (4)    
E    
130 mm (5.12 in)    
F    
149.0 mm (5.87 in)    
G    
66.2 mm (2.61 in)    
H    
125.5 mm (4.94 in)    
I    
17.8 mm (.70 in)