Information autom. advance mechanism
BOSCH
9 420 615 079
9420615079
ZEXEL
105672-0110
1056720110
MITSUBISHI
ME726462
me726462
Rating:
Scheme ###:
| 1. | [1] | 156720-0621 | TIMING-DEVICE HOUSING |
| 2. | [1] | 156721-1000 | FLANGE BUSHING |
| 3. | [2] | 156723-0300 | ECCENTRIC DISC |
| 3. | [2] | 156723-0300 | ECCENTRIC DISC |
| 4. | [2] | 156723-0400 | ECCENTRIC DISC |
| 4. | [2] | 156723-0400 | ECCENTRIC DISC |
| 5. | [1] | 156730-3920 | FLYWEIGHT ASSEMBLY |
| 5/1. | [2] | 156722-0920 | FLYWEIGHT |
| 5/1. | [2] | 156722-0920 | FLYWEIGHT |
| 5/2. | [4] | 156727-1000 | SPRING SEAT |
| 5/2. | [4] | 156727-1000 | SPRING SEAT |
| 5/3. | [4] | 156727-1000 | SPRING SEAT |
| 5/3. | [4] | 156727-1000 | SPRING SEAT |
| 5/4. | [4] | 156725-2800 | COMPRESSION SPRING |
| 5/4. | [4] | 156725-2800 | COMPRESSION SPRING |
| 5/5. | [4] | 156725-2300 | COMPRESSION SPRING |
| 5/5. | [4] | 156725-2300 | COMPRESSION SPRING |
| 5/6. | [4] | 156809-0300 | LOCKING WASHER |
| 5/6. | [4] | 156809-0300 | LOCKING WASHER |
| 5/7. | [2] | 156726-1000 | PIN |
| 5/8/1. | [0] | 156728-0800 | SHIM D19&15T0.1 |
| 5/8/1. | [0] | 156728-0900 | SHIM D19&15T0.3 |
| 5/8/1. | [0] | 156728-0900 | SHIM D19&15T0.3 |
| 5/8/1. | [0] | 156728-1000 | SHIM D19&15T0.5 |
| 5/8/1. | [0] | 156728-1100 | SHIM D19&15T1.0 |
| 5/8/1. | [0] | 156728-2000 | SHIM D19&15T0.4 |
| 5/8/1. | [0] | 156728-2100 | SHIM D19&15T0.7 |
| 5/9/1. | [0] | 156728-1200 | SHIM D14&10.6T0.1 |
| 5/9/1. | [0] | 156728-1200 | SHIM D14&10.6T0.1 |
| 5/9/1. | [0] | 156728-1300 | SHIM D14&10.6T0.3 |
| 5/9/1. | [0] | 156728-1400 | SHIM D14&10.6T0.5 |
| 5/9/1. | [0] | 156728-1500 | SHIM D14&10.6T1.0 |
| 5/9/1. | [0] | 156728-2200 | SHIM D14&10.6T0.4 |
| 5/9/1. | [0] | 156728-2300 | SHIM D14&10.6T0.7 |
| 5/10. | [2] | 156808-0800 | SPACER BUSHING |
| 13. | [1] | 156729-1220 | COVER |
| 13/2. | [1] | 139635-0100 | PACKING RING |
| 13/3. | [1] | 156117-0100 | O-RING |
| 30. | [1] | 029321-4010 | LOCKING WASHER |
| 31. | [1] | 131325-3200 | UNION NUT |
| 33. | [2] | 026508-1240 | GASKET D11.9&8.2T1 |
| 34. | [2] | 156115-0100 | CAPSULE |
Include in #1:
101606-6481
as AUTOM. ADVANCE MECHANIS
Cross reference number
Zexel num
Bosch num
Firm num
Name
105672-0110
ME726462 MITSUBISHI
AUTOM. ADVANCE MECHANISM
K 14KK AUTOMATIC TIMER TIMER SAG TIMER
K 14KK AUTOMATIC TIMER TIMER SAG TIMER
Information:
1. Remove oil filter elements (1). 2. Remove two bolts (2).3. Remove four bolts (3).4. Remove six bolts (4) then remove oil filter base, gaskets and o-rings. The following steps are for the installation of the oil filter and oil filter base. Position gaskets and install all bolts finger tight before tightening to the standard torque.5. Be sure the o-rings are in place on oil filter base. Position gaskets and oil filter base, then install bolts (4).6. Install bolts (3).7. Position gasket and install bolts (2). Then tighten all the bolts to standard torque.8. Install oil filter elements (1).Oil Filter Base, Disassemble And Assemble
Start By:a. remove oil filter base 1. Remove the o-rings and remove bolt (1). 2. Remove relief valve group (2). 3. Remove four bolts and remove covers (3). Remove oil cooler by-pass valve (5), oil cooler by-pass valve spring (4) and spool (6). 4. Remove plug (7) and remove oil filter by-pass valve (8). The following steps are for the assembly of the oil filter base.5. Install by-pass valve (8) and plug (7).6. Install oil cooler by-pass valve (5), oil pump by-pass valve (6) and spring (4), then position covers (3) and install bolts.7. Position relief valve group (2) and install bolt (1). Install o-ring seals.End By:a. install oil filter base
Start By:a. remove oil filter base 1. Remove the o-rings and remove bolt (1). 2. Remove relief valve group (2). 3. Remove four bolts and remove covers (3). Remove oil cooler by-pass valve (5), oil cooler by-pass valve spring (4) and spool (6). 4. Remove plug (7) and remove oil filter by-pass valve (8). The following steps are for the assembly of the oil filter base.5. Install by-pass valve (8) and plug (7).6. Install oil cooler by-pass valve (5), oil pump by-pass valve (6) and spring (4), then position covers (3) and install bolts.7. Position relief valve group (2) and install bolt (1). Install o-ring seals.End By:a. install oil filter base