Fuel injectors
  1. Home
  2. autom
  3. #1056425000

105642-5000 ZEXEL 9 420 616 424 BOSCH AUTOM. ADVANCE MECHANISM 9420616424 1056425000 me036704


 

Information autom. advance mechanism

BOSCH 9 420 616 424 9420616424
ZEXEL 105642-5000 1056425000
MITSUBISHI ME036704 me036704
105642-5000 AUTOM. ADVANCE MECHANISM
Rating:
60
Buy AUTOM. ADVANCE MECHANISM 105642-5000 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

TIMING-DEVICE HOUSING
1. [1] 156400-0520 TIMING-DEVICE HOUSING
2. [2] 156405-6320 FLYWEIGHT
3. [1] 156402-0320 FLANGE BUSHING
4. [2] 156410-0300 SLOTTED WASHER
5/1. [0] 029310-6220 SHIM D11.5&6.5T0.10
5/1. [0] 029310-6230 SHIM D11.5&6.5T0.20
5/1. [0] 029310-6240 SHIM D11.5&6.5T0.25
5/1. [0] 029310-6250 SHIM D11.5&6.5T1.00
5/1. [0] 029310-6370 SHIM D11.5&6.5T0.30
5/1. [0] 029310-6380 SHIM D11.5&6.5T0.40
5/1. [0] 029310-6390 SHIM D11.5&6.5T0.50
5/1. [0] 029310-6400 SHIM D11.5&6.5T0.60
5/1. [0] 029310-6410 SHIM D11.5&6.5T0.70
5/1. [0] 029310-6420 SHIM D11.5&6.5T0.80
5/1. [0] 029310-6430 SHIM D11.5&6.5T0.90
5/1. [0] 139406-0500 SHIM D11.5&6.5T1.5
5/1. [0] 139406-0600 SHIM D11.5&6.5T2.0
6. [2] 156411-2200 COMPRESSION SPRING
7. [2] 156410-0300 SLOTTED WASHER
8/1. [0] 029310-6220 SHIM D11.5&6.5T0.10
8/1. [0] 029310-6230 SHIM D11.5&6.5T0.20
8/1. [0] 029310-6240 SHIM D11.5&6.5T0.25
8/1. [0] 029310-6250 SHIM D11.5&6.5T1.00
8/1. [0] 029310-6370 SHIM D11.5&6.5T0.30
8/1. [0] 029310-6380 SHIM D11.5&6.5T0.40
8/1. [0] 029310-6390 SHIM D11.5&6.5T0.50
8/1. [0] 029310-6400 SHIM D11.5&6.5T0.60
8/1. [0] 029310-6410 SHIM D11.5&6.5T0.70
8/1. [0] 029310-6420 SHIM D11.5&6.5T0.80
8/1. [0] 029310-6430 SHIM D11.5&6.5T0.90
8/1. [0] 139406-0500 SHIM D11.5&6.5T1.5
8/1. [0] 139406-0600 SHIM D11.5&6.5T2.0
9. [2] 156411-2200 COMPRESSION SPRING
10. [2] 156412-0100 BUSHING
11/1. [1] 156413-0600 ROLLER D18.00
11/1. [1] 156413-0700 ROLLER D17.90
11/1. [1] 156413-0800 ROLLER D18.10
11/1. [1] 156413-0900 ROLLER D18.20
12. [2] 029301-0420 PLAIN WASHER
13. [2] 156417-0000 RETAINER
13. [2] 156417-0000 RETAINER
14. [1] 156415-0001 O-RING
16. [1] 156408-0100 COVER
17. [1] 156409-0000 PACKING RING
19. [2] 029341-0130 GASKET
20. [2] 029005-8080 BLEEDER SCREW
21. [1] 029331-0190 GASKET
22. [1] 156316-0000 CAPSULE
26. [1] 156314-0301 CAP
27. [1] 156420-0000 TOOTHED GEAR
28. [4] 014110-8440 LOCKING WASHER D15.4&8.2T2
29. [4] 156603-8900 BLEEDER SCREW
30. [1] 029321-4030 LOCKING WASHER
31. [1] 131325-2201 UNION NUT
32. [1] 029632-4060 O-RING

Include in #1:

101601-6601 as AUTOM. ADVANCE MECHANIS
101601-6900
101601-6901
101601-6910
101601-6911
101601-6920
101601-6921
101603-1020
101603-1021
101603-1031
101603-1051
101603-1540
101603-1560
101603-1640

Cross reference number

Zexel num
Bosch num
Firm num
Name
105642-5000 
9 420 616 424 
NP-EP/SAZ1200-1500B5L1N1 
ME036704  MITSUBISHI
AUTOM. ADVANCE MECHANISM
K 14KE AUTOMATIC TIMER TIMER SAD(Z) TIMER




Information:

Make reference to ANALYZING TURBOCHARGER FAILURE, Form No. FEG45138.(1) See TURBOCHARGER IMPELLER INSTALLATION.(2) Torque for bolts holding thrust plate ... 40 5 lb. in.(4.5 0.6 N m)(3) Tighten bolt holding band clamp to ... 120 10 lb. in.(14 1 N m)(4) Put 9M3710 or 4S9416 Anti-Seize Compound on threads of bolts holding turbine housing and tighten to ... 175 15 lb. in.(20 2 N m)(5) Put 9M3710 or 4S9416 Anti-Seize Compound on threads of bolts holding turbocharger to manifold and tighten to ... 40 4 lb. ft.(55 5 N m)(6) End play for shaft (new) ... .006 to .011 in.(0.15 to 0.27 mm)(7) Bore in the bearing ... .6268 to .6272 in.(15.921 to 15.931 mm) Diameter of surface on shaft (journal) for the bearing ... .6250 to .6254 in.(15.875 to 15.885 mm)(8) Bore in housing ... .9827 to .9832 in.(24.961 to 24.973 mm) Outside diameter of the bearing ... .9780 to .9785 in.(24.841 to 24.854 mm)(9) Clearance between ends of oil seal ring ... .008 to .015 in.(0.20 to 0.38 mm) The radial clearance for the shaft is .004 to .009 in. (0.10 to 0.23 mm).(AiResearch TV81)
(1) Nut for impeller (See TURBOCHARGER IMPELLER INSTALLATION) Do not bend or add stress to the shaft when nut is tightened.(2) Torque for the bolts that hold the backplate ... 90 10 lb.in.(10 1 N m)(3) Torque for the clamp bolts ... 10 1 lb. ft.(14 1 N m)(4) Bore in the bearings ... .6268 to .6272 in.(15.921 to 15.931 mm) Diameter for the surfaces (journals) on the shaft for the bearings ... .6250 to .6254 in.(15.875 to 15.885 mm)(5) Bore in the housing ... .9827 to .9832 in.(24.961 to 24.973 mm) Outside diameter of the bearings ... .9782 to .9787 in.(24.846 to 24.859 mm)(6) Clearance between the ends of the oil seal ring ... .008 to .015 in.(0.20 to 0.38 mm)(7) End play for the shaft ... .003 to .010 in.(0.08 to 0.25 mm)(8) Torque for support nuts (put 9M3710 or 4S9416 Anti-Seize Compound on the stud threads) ... 40 4 lb. ft.(55 5 N m)(AiResearch T1810)
Make reference to ANALYZING TURBOCHARGER FAILURE. Form No. FEG45138.(1) End play for shaft ... .0065 .0025 in.(0.165 0.063 mm) Radial clearance for the shaft ... .004 to .009 in.(0.10 to 0.23 mm)(2) Bore in the bearing ... .6268 to .6272 in.(15.921 to 15.931 mm) Diameter of surface on shaft (journal) for the bearing ... .6250 to .6254 in.(15.875 to 15.885 mm)(3) Put 8S6747 Gasket Sealer on bolts holding compressor housing and tighten to ... 105 5 lb. in.(11.9 0.6 N m)(4) Put 9M3710 or 4S9416 Anti-Seize Compound on bolts holding turbine housing and tighten to ... 175 15 lb. in.(19.8 1.7 N m)(5) Put 9M3710 or 4S9416 Anti-Seize Compound on

Have questions with 105642-5000?





Group cross 105642-5000 ZEXEL

Mitsubishi 

105642-5000  
9 420 616 424 
NP-EP/SAZ1200-1500B5L1N1 
ME036704 
AUTOM. ADVANCE MECHANISM
Back to top