105614-4340 ZEXEL 9 420 617 233 BOSCH AUTOM. ADVANCE MECHANISM 9420617233 1056144340

Information autom. advance mechanism

BOSCH 9 420 617 233 9420617233

ZEXEL 105614-4340 1056144340

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy AUTOM. ADVANCE MECHANISM 105614-4340 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	156132-9220	FLYWEIGHT ASSEMBLY
2.	[2]	156108-5800	FLYWEIGHT
2.	[2]	156108-5800	FLYWEIGHT
3/1.	[0]	029310-9010	SHIM D19.6&9T0.5
3/1.	[0]	029310-9020	SHIM D19.6&9T1
3/1.	[0]	029310-9030	SHIM D19.6&9T0.1
3/1.	[0]	029310-9040	SHIM D19.6&9T0.2
3/1.	[0]	029310-9050	PLAIN WASHER D19.6&9T1.5
3/1.	[0]	029310-9050	PLAIN WASHER D19.6&9T1.5
3/1.	[0]	139409-0000	SHIM D19.6&9.0T0.15
4.	[2]	156124-0700	COMPRESSION SPRING
4.	[2]	156124-0700	COMPRESSION SPRING
11.	[1]	156130-3920	FLANGE BUSHING
12.	[1]	029622-8010	PACKING RING
13.	[1]	156117-0100	O-RING
14.	[1]	156114-1500	CASE
15.	[1]	156116-2120	PACKING RING
16.	[2]	026508-1240	GASKET D11.9&8.2T1
17.	[2]	156115-0100	CAPSULE
18.	[1]	029321-4010	LOCKING WASHER
19.	[1]	131325-0400	UNION NUT

Include in #1:

101600-9000 as AUTOM. ADVANCE MECHANIS

101600-9010

Cross reference number

Zexel num

Bosch num

Firm num

Name

105614-4340

9 420 617 233

AUTOM. ADVANCE MECHANISM
* K

Information:

start by: a) remove fuel injection pumpsb) separation of governor from fuel injection pump housingc) remove fuel transfer pump1. Loosen the screws that hold the levers to the shaft assembly. 2. Remove the screw (1) that holds the lever assembly (2) to the shaft assembly. 3. Remove the shaft assembly (5) from the housing and remove the levers (3) and lever assembly (2).4. Loosen the screws that hold the levers (6) to the shaft.5. Remove the screw that holds the lever (4) to the shaft.6. Remove the shaft (7) from the housing and remove the levers. 7. Remove the lifter and roller assemblies (8) from the housing with a magnet. Put identification on the lifters (10) and rollers (9) for installation in their respective bores in the housing. 8. Remove the camshaft (11) from the housing.
Do not use a force to remove the camshaft. Turn the camshaft to permit the free passage of the camshaft by the bosses (12) in the housing.
Assemble Fuel Injection Pump Housing
1. Install the camshaft (1) in the housing.
Do not use a force to install the camshaft. Turn the camshaft to permit the free passage of the camshaft by the bosses in the housing.
2. Install the lifter and roller assemblies (2) in their respective bores in the housing with a magnet. Install the lifters with their grooves in alignment with the pins (3) in the housing. 3. Put the shaft (4) in the housing. Slide the levers (6) and the lever (5) on to the shaft in the order shown. Push the shaft into position in the housing. 4. Install the screw that holds the lever (5) to the shaft. Tighten the screw to a torque of 24 2 lb.in. (27.7 2.3 cm.kg). 5. Put the shaft assembly (7) in the housing. Slide the levers (9) and the lever assembly (8) on to the shaft in the order shown. Push the shaft assembly into position in the housing. 6. Install the screw that holds the lever assembly (8) to the shaft assembly. Tighten the screw to a torque of 24 2 lb. in. (27.7 2.3 cm.kg).end by: a) make adjustments to the sleeve control shafts (see TESTING AND ADJUSTING)b) install fuel transfer pumpc) connection of governor to fuel injection pump housingd) install fuel injection pumps