105614-0780 ZEXEL 9 420 616 128 BOSCH AUTOM. ADVANCE MECHANISM 9420616128 1056140780

Information autom. advance mechanism

BOSCH 9 420 616 128 9420616128

ZEXEL 105614-0780 1056140780

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy AUTOM. ADVANCE MECHANISM 105614-0780 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	156132-9220	FLYWEIGHT ASSEMBLY
2.	[2]	156108-6000	FLYWEIGHT
3/1.	[0]	029310-9010	SHIM D19.6&9T0.5
3/1.	[0]	029310-9020	SHIM D19.6&9T1
3/1.	[0]	029310-9030	SHIM D19.6&9T0.1
3/1.	[0]	029310-9040	SHIM D19.6&9T0.2
3/1.	[0]	029310-9050	PLAIN WASHER D19.6&9T1.5
3/1.	[0]	139409-0000	SHIM D19.6&9.0T0.15
4.	[2]	156124-1400	COMPRESSION SPRING
11.	[1]	156130-5120	FLANGE BUSHING
12.	[1]	029622-8010	PACKING RING
13.	[1]	156117-0100	O-RING
14.	[1]	156114-1500	CASE
15.	[1]	156116-2120	PACKING RING
16.	[2]	026508-1240	GASKET D11.9&8.2T1
17.	[2]	156115-0100	CAPSULE
18.	[1]	029321-4010	LOCKING WASHER
19.	[1]	131325-0400	UNION NUT

Include in #1:

101603-9180 as AUTOM. ADVANCE MECHANIS

101603-9181

Cross reference number

Zexel num

Bosch num

Firm num

Name

105614-0780

9 420 616 128

AUTOM. ADVANCE MECHANISM
K 14KC AUTOMATIC TIMER TIMER SA TIMER

Information:

Start By:a. remove flywheelb. remove crankshaft rear seal and wear sleeve **Remove the crankshaft rear seal and wear sleeve only if the engine is equipped with the later design seal. The later design seal can be identified by the rotation marks on the seal.
Some flywheel housings will have more bolts holding the flywheel housing to the cylinder block.
1. If the engine is equipped with an electric starting motor, remove the electric starting motor from the flywheel housing.2. Remove the bolts that hold the oil pan plate to the flywheel housing. Loosen the bolts that hold the oil pan plate to the cylinder block.3. Install spacers between the oil pan plate and the cylinder block to hold the oil pan plate away from the flywheel housing.
3306 Engine Shown4. On 3306 Engines, remove turbocharger oil drain pipe (1).5. Install Tool (A) on the flywheel housing as shown, and fasten a hoist to it.6. Remove all bolts (2) and the flywheel housing from the engine. The weight of the flywheel housing is 37 kg (82 lb).Install Flywheel Housing
3306 Engine Shown1. Install Tool (A) on the flywheel housing. Fasten a hoist to the flywheel housing. 2. Put the gasket and flywheel housing in position on the engine. Install bolts (2) that hold it. Tighten the bolts to a torque of 100 14 N m (74 10 lb ft) as shown.3. Remove Tool (A) from the flywheel housing.4. On 3306 Engines, install turbocharger oil drain line (1).5. Cut the bottom of the flywheel housing gasket off even with the cylinder block and flywheel housing. Put 3S6252 RTV Silicone Adhesive/Sealant on the bottom of the gasket where it makes contact with the oil pan plate gasket.6. Remove the spacers from between the oil pan plate and the cylinder block. Install the bolts that hold the oil pan plate to the flywheel housing. Tighten the bolts that hold the oil pan plate to the cylinder block.7. If the engine is equipped with an electric starting motor, install it on the flywheel housing.End By:a. install crankshaft rear seal and wear sleeveb. install flywheel