105691-3420 ZEXEL 9 420 617 002 BOSCH AUTO;TIMING DEVICE 9420617002 1056913420 1685196675

Information auto;timing device

BOSCH 9 420 617 002 9420617002

ZEXEL 105691-3420 1056913420

NISSAN-DIESEL 1685196675 1685196675

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy AUTO;TIMING DEVICE 105691-3420 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	156991-7820	AUTO;TIMING DEVICE
1/1.	[1]	156900-4300	FLANGE BUSHING
1/2.	[1]	156901-3620	TIMING-DEVICE HOUSING
1/3.	[6]	139006-2700	BLEEDER SCREW
1/5.	[2]	156904-0000	ECCENTRIC DISC
1/5.	[2]	156904-0000	ECCENTRIC DISC
1/6.	[2]	156904-0100	ECCENTRIC DISC
1/6.	[2]	156904-0100	ECCENTRIC DISC
1/7.	[1]	156903-1120	SLOTTED WASHER
1/8.	[2]	156907-1320	PLATE
1/8.	[2]	156907-1320	PLATE
1/9.	[2]	156910-2700	PIN
1/10.	[4]	156908-4300	COMPRESSION SPRING
1/10.	[4]	156908-4300	COMPRESSION SPRING
1/11.	[4]	156909-0000	SLOTTED WASHER
1/11.	[4]	156909-0000	SLOTTED WASHER
1/12.	[4]	156707-0000	SLOTTED WASHER
1/12.	[4]	156707-0000	SLOTTED WASHER
1/13.	[4]	156913-7400	LOCKING WASHER
1/13.	[4]	156913-7400	LOCKING WASHER
1/14.	[1]	156905-0800	CYLINDER
1/15.	[2]	156906-0300	PUMP PLUNGER
1/16.	[2]	156906-0300	PUMP PLUNGER
1/17.	[1]	156902-0820	COVER
1/17/3.	[1]	139799-0100	O-RING
1/19.	[6]	010235-0820	HEX-SOCKET-HEAD CAP SCREW
1/21.	[1]	156913-0900	CAPSULE
1/35.	[4]	156913-7300	SHIM
1/35.	[4]	156913-7300	SHIM
2.	[1]	479748-2200	PULSE GENERATOR
3.	[1]	029201-6150	UNION NUT
4.	[1]	139316-0000	PLAIN WASHER D25&16.5T5
5.	[1]	156913-7100	PLATE
6.	[2]	020018-2070	BLEEDER SCREW M8P1.25L20 7T
8.	[2]	014020-8140	PLAIN WASHER D16&8.5T1.2
10.	[1]	134563-2300	WOODRUFF KEY
11.	[1]	156913-8600	CAP
12.	[1]	139756-0000	O-RING
13.	[2]	012206-1220	FLAT-HEAD SCREW
16.	[1]	156809-0100	UNION NUT
17.	[1]	156809-0000	LOCKING WASHER

Include in #1:

106671-0670 as AUTOM. ADVANCE MECHANIS

106671-0671

Cross reference number

Zexel num

Bosch num

Firm num

Name

105691-3420

9 420 617 002

1685196675 NISSAN-DIESEL

AUTO;TIMING DEVICE
* K

Information:

(1) Bore in bearing of idler gear ... 28.600 0.048 mm (1.1260 .0019 in.) Diameter of shaft for the idler gear ... 28.512 0.013 mm (1.1225 .0005 in.)Clearance between bearing and shaft ... 0.028 to 0.150 mm (.0011 to .0059 in.)(2) Clearance between gear and body of pump ... 0.05 to 0.66 mm (.002 to .026 in.)(3) Diameter of shafts for pump ... 22.217 0.005 mm (.8747 .0002 in.) Bore in bearings for shafts (2P1785) ... 22.258 0.008 mm (.8763 .0003 in.)Bore in bearings for shafts (4W2448) ... 22.286 0.051 mm (.8774 .0020 in.)Clearance between shafts and bearings (2P1785) ... 0.028 to 0.053 mm (.0011 to .0021 in.)Clearance between shafts and bearings (4W2448) ... 0.025 to 0.127 mm (.0010 to .0050 in.)(4) Depth that bearings are installed in pump bodies ... 1.5 0.25 mm (.060 .010 in.)(5) Gear. Length of gears ... 50.808 0.025 mm (2.0003 .0010 in.) Depth of bore in pump body for gears ... 50.935 0.020 mm (2.0053 .0008 in.)Clearance between end of gears and pump body ... 0.081 to 0.173 mm (.0032 to .0068 in.)(6) Length of gears ... 38.070 0.025 mm (1.4988 .0010 in.) Depth of bore in pump body for gears ... 38.197 0.020 mm (1.5038 .0008 in.)Clearance between end of gears and pump body ... 0.081 to 0.173 mm (.0032 to .0068 in.)(7) Distance from the end of the idler shafts to gear faces ... 21.03 .127 mm (.828 .005 in.) Maximum temperature of gear when shrinking in place ... 398°C (750°F)(8) Distance from the end of the drive shaft to gear face ... 38.2 0.12 mm (1.505 .005 in.) Maximum temperature of gear when shrinking in place ... 398°C (750°F)(9) Torque for bolt holding drive gear to drive shaft ... 43 7 N m (32 5 lb ft) Install the bearings in the cover and body for the oil pump so the bearing junctions (joints) are in the position shown.(10) Distance dowel extends from body ... 6.0 0.5 mm (.24 .02 in.)(11) Shaft assembly. Distance shaft assembly extends from body ... 30.50 0.25 mm (1.200 .010 in.) Before running, lubricate pump with oil. Pump must rotate freely by hand.