105690-0251 ZEXEL 9 420 616 329 BOSCH AUTO;TIMING DEVICE 9420616329 1056900251 1157405251

Information auto;timing device

BOSCH 9 420 616 329 9420616329

ZEXEL 105690-0251 1056900251

ISUZU 1157405251 1157405251

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy AUTO;TIMING DEVICE 105690-0251 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	156990-3221	AUTO;TIMING DEVICE
1/1.	[1]	156900-9522	FLANGE BUSHING
1/2.	[1]	156901-9121	TIMING-DEVICE HOUSING
1/3.	[2]	156904-0400	ECCENTRIC DISC
1/3.	[2]	156904-0400	ECCENTRIC DISC
1/4.	[2]	156904-0500	ECCENTRIC DISC
1/4.	[2]	156904-0500	ECCENTRIC DISC
1/5.	[2]	156907-3721	PLATE
1/5.	[2]	156907-3721	PLATE
1/7.	[4]	156908-6900	COILED SPRING
1/7.	[4]	156908-6900	COILED SPRING
1/11.	[1]	156905-1821	CYLINDER
1/12.	[2]	156906-0201	PUMP PLUNGER
1/13.	[2]	156906-0201	PUMP PLUNGER
1/14.	[1]	156902-1722	COVER
1/14/2.	[1]	139799-0300	O-RING
1/15.	[6]	156913-3300	BLEEDER SCREW
1/16.	[1]	156913-4820	TIMING RING
1/17.	[1]	156911-0600	BEARING PIN
1/18.	[1]	011004-0820	SET OF NUTS
1/35.	[4]	156913-7300	SHIM
1/35.	[4]	156913-7300	SHIM
2.	[1]	479771-5400	PULSE GENERATOR
3.	[1]	029201-6150	UNION NUT
4.	[1]	139316-0000	PLAIN WASHER
5.	[1]	156913-8300	PLATE
6.	[2]	020018-2070	BLEEDER SCREW
7.	[2]	014020-8140	PLAIN WASHER
9.	[1]	479771-5320	PULSE GENERATOR
13.	[1]	156914-7300	CAPSULE
14.	[1]	156914-4521	CAPSULE
15.	[1]	025804-1610	WOODRUFF KEY
16.	[1]	131325-1800	UNION NUT
17.	[1]	029321-4030	LOCKING WASHER
20.	[1]	156914-7400	FILLER PIECE

Include in #1:

101606-0141 as AUTOM. ADVANCE MECHANIS

101606-0380

101606-0570

Cross reference number

Zexel num

Bosch num

Firm num

Name

105690-0251

9 420 616 329

1157405251 ISUZU

AUTO;TIMING DEVICE
K 14KN VARIABLE TIMER TIMER V/T TIMER

Information:

Operations that may cause product damage are identified by notice labels in this publication.
Introduction
This Tool Operating Manual contains two filter installation procedures. This first procedure is for installing a primary filter system. This is a coarse filter and will protect the transfer pump from contamination in the oil. The second procedure outlines installing a secondary filter which is designed to protect injection pumps from contaminated oil. Fuel injection pumps used on the 3208 Engine are one example of a fuel injection pump that requires the secondary filter installation.It will be the dealer choice as to which optional filter is installed on the test stand. Determine what type of filtering will be required most often, and install the appropriate type of filtering system. These filters can only be added to the 15 horsepower test stands.Secondary Filter
Nomenclature
Illustration 1. Nomenclature for Secondary Filter Installation. Refer to Chart A for item identification. Fabricated Parts
All the parts required for this installation can be ordered from Caterpillar Parts Distribution, except bracket (1). This must be manufactured by the bench owner, using the dimensions provided below.This bracket can be made from common SAE1018 steel. Weld the two pieces together.
Illustration 2. Filter Mounting Bracket. Refer to Chart B for dimensions. Installation
Assemble the Fuel Filter
1. Install 053-0088 Fitting (17) with 3J-1907 Seal (18) into the inlet port (left side) of the filter base. (This converts a number 6 STOP port to NPT). Install 5P-4455 Fitting (19) into fitting (17).2. Install 2R-6806 Fitting (15) with 3J-1907 Seal (16) into the outlet port (right side) of the filter base.3. Install 6N-4414 Cover (7) onto the filter base using 1P-0436 Gasket (8), 4B-3388/6V-2317 (9), and OS-1616/6V-8490 Bolt (10).4. Install 9S-4182 Plug (5) with 6V-5084 O-ring Seal (6) into the top of the filter base.5. Install the filter base assembly onto filter bracket (1),