159590-9820 ZEXEL 9 421 613 626 BOSCH ADJUSTING DEVICE 9421613626 1595909820 me738474


 

Information adjusting device

BOSCH 9 421 613 626 9421613626
ZEXEL 159590-9820 1595909820
MITSUBISHI ME738474 me738474
159590-9820 ADJUSTING DEVICE
Rating:
29
Buy ADJUSTING DEVICE 159590-9820 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 159595-3821 DIAPHRAGM HOUSING
2. [4] 159596-2800 BLEEDER SCREW
3. [1] 159595-9800 SEAL RING
5. [1] 131420-0400 BLEEDER SCREW
6. [1] 026506-1040 GASKET
8. [2] 029341-4130 GASKET
9. [1] 029731-4680 EYE BOLT
15. [1] 159604-0820 ACTUATOR
16. [1] 159596-5800 SEAL RING
17. [4] 010206-3040 HEX-SOCKET-HEAD CAP SCREW
17. [4] 010206-3040 HEX-SOCKET-HEAD CAP SCREW
18. [1] 139306-0400 PLAIN WASHER
19. [4] 029320-6010 LOCKING WASHER
19. [4] 029320-6010 LOCKING WASHER
20. [3] 159595-5700 PLAIN WASHER
30. [1] 159911-1100 CLAMPING BAND
800S. [1] 159595-8801 COVER
801S. [1] 159596-1400 SEAL RING
802S. [4] 010206-3040 HEX-SOCKET-HEAD CAP SCREW
803S. [4] 029320-6010 LOCKING WASHER
804S. [1] 159910-6800 PLUG HOUSING

Cross reference number

Zexel num
Bosch num
Firm num
Name
159590-9820 
159590-9821 
9 421 613 626 
ME738474  MITSUBISHI
ADJUSTING DEVICE
* K 14GJ GOV




Information:

Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Keep all exhaust manifold and turbocharger shields in place to protect hot exhaust from oil spray in the event of a line, tube or seal failure.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Wash hands after touching batteries and connectors. Use of gloves is recommended.Batteries give off flammable fumes which can explode. Ensure there is proper ventilation for batteries which are located in an enclosure.Always thaw a frozen battery before jump starting. Frozen batteries can explode.Do not smoke when observing the battery electrolyte levels.Always wear protective glasses when working with batteries.Never disconnect any charging unit circuit or battery circuit cable from the battery when charging unit is operating. A spark can cause the flammable vapor mixture of hydrogen and oxygen to explode.Fire or Explosion Prevention
Fire may result from lubricating oil or fuel sprayed on hot surfaces causing personal injury and property damage. Inspect all lines and tubes for wear or deterioration. They must be routed, supported or clamped securely. Tighten all connections to the recommended torque. Leaks can cause fires.Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices (i.e. air inlet shutoff) suitable for the application involved.All fuels, most lubricants and some coolant mixtures are flammable.Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes are extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Batteries give off flammable fumes which can explode.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the engine.Do not expose the engine to flames, burning brush, etc., if at all possible.Shields (if equipped), which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Provide adequate and proper waste oil disposal. Oil and fuel filters must be properly installed and housing covers tightened to proper torque when being changed.Batteries must be kept clean, covers kept on all cells, recommended cables and connections used and battery box covers kept in place when operating.When starting from an external source, always connect the positive (+) jumper cable to the POSITIVE (+) terminal of

Have questions with 159590-9820?





Group cross 159590-9820 ZEXEL

Mitsubishi 

159590-9820  

159590-9821 
9 421 613 626 
ME738474 
ADJUSTING DEVICE
F 019 Z2E 576 
ME755052 
ADJUSTING DEVICE
Back to top