105952-2900 ZEXEL F 019 Z3E 879 BOSCH ACTUATOR f019z3e879 1059522900

Information actuator

BOSCH F 019 Z3E 879 f019z3e879

ZEXEL 105952-2900 1059522900

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy ACTUATOR 105952-2900 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	159560-0100	GOVERNOR HOUSING
2.	[8]	139006-4100	BLEEDER SCREW
3.	[1]	029621-7050	PACKING RING
4.	[1]	159564-5200	COILED SPRING
5.	[1]	159564-4000	SLOTTED WASHER
6.	[1]	159635-8800	SLOTTED WASHER
7.	[1]	159636-4521	CONNECTOR
7B.	[1]	159636-4621	CONNECTOR
7C.	[1]	159636-4721	CONNECTOR
8.	[1]	020105-1240	BLEEDER SCREW M5P0.8L12
11.	[1]	159579-7220	ACTUATOR
11/2.	[1]	159636-5020	STRAP
11/3.	[1]	159563-1700	LEVER SHAFT
11/4.	[2]	029311-0170	SHIM
11/4.	[2]	029311-0170	SHIM
11/5.	[2]	159635-0200	O-RING
11/5.	[2]	159635-0200	O-RING
11/6.	[2]	014011-0140	PLAIN WASHER D22&10.5T1.6
11/6.	[2]	014011-0140	PLAIN WASHER D22&10.5T1.6
11/8.	[1]	016010-0940	LOCKING WASHER
11/9.	[1]	159585-0020	LINEAR DC MOTOR
11/10.	[4]	139006-9100	BLEEDER SCREW
11/12.	[4]	020105-2040	BLEEDER SCREW M5P0.8L20
11/17/6.	[1]	016520-2410	O-RING
11/17/8.	[1]	159910-3300	SOCKET HOUSING
11/17/12.	[1]	159910-3500	SOCKET HOUSING
11/17/19.	[1]	159910-3400	HOLDER
11/17/20.	[1]	159910-3600	HOLDER
11/18.	[4]	020106-1840	BLEEDER SCREW M6P1L18
11/19.	[1]	131002-2700	ADAPTOR
11/21.	[1]	159583-2800	CONTROL LEVER
11/22.	[1]	159563-4800	COILED SPRING
11/23.	[1]	159563-1800	BUSHING
11/24.	[1]	014110-8440	LOCKING WASHER
11/25.	[1]	013030-8140	UNION NUT M8P1.25H5
11/26.	[1]	159563-1000	FLAT-HEAD SCREW
11/27.	[1]	139006-9800	FLAT-HEAD SCREW
11/27.	[1]	155615-1700	FLAT-HEAD SCREW
11/28.	[2]	013020-6040	UNION NUT
11/28.	[2]	029240-6010	UNION NUT M6P1.0H5*
11/28.	[2]	029240-6010	UNION NUT M6P1.0H5*
11/29.	[1]	159563-2701	BRACKET
11/32.	[2]	020106-1440	BLEEDER SCREW M6P1.0L14
11/34.	[1]	139006-9900	FLAT-HEAD SCREW
11/34.	[1]	159563-8400	FLAT-HEAD SCREW
12.	[2]	020106-4040	BLEEDER SCREW
13.	[1]	159561-0400	GOVERNOR COVER
14.	[4]	139006-9300	BLEEDER SCREW
15.	[2]	139006-9200	BLEEDER SCREW
17.	[1]	154371-5600	GASKET
18.	[1]	154390-0400	GASKET
19.	[1]	154390-0500	GASKET
22.	[1]	029731-4680	EYE BOLT
23.	[2]	029341-4130	GASKET D20&13.8T2*
27.	[2]	139006-9400	BLEEDER SCREW
60.	[2]	013020-6040	UNION NUT M6P1H5
61.	[2]	159586-8400	SLIDING PIECE
80.	[1]	159564-9200	TOOTHED GEAR
81.	[1]	014111-2420	LOCKING WASHER
82.	[1]	013031-2120	UNION NUT
83.	[1]	025803-1310	WOODRUFF KEY
900S.	[1]	025803-1310	WOODRUFF KEY
901S.	[1]	025803-1610	WOODRUFF KEY

Include in #1:

106685-4336 as GOVERNOR

106685-4375

106685-4376

Cross reference number

Zexel num

Bosch num

Firm num

Name

105952-2900

F 019 Z3E 879

ACTUATOR
K 14JT ACTUATOR GOV

Information:

Typical Example1. Remove bolts (1) and cover (2). Remove bolts (3) and cover (4).
Typical Example2. Remove bolts (5) and adapter (6). Be sure that gear stays in place. Remove bolts (7) and cover (8). Keep gear in place.
Typical Example3. Remove gears (9) and crankshaft gear (10). Remove bolts (11) and idler gear (12) with retainer. Remove bolts (13) and idler gear (14) with retainer.
Typical Example4. Secure strap and a hoist to housing (15). Remove hose assembly (16) and small bolts (17) and large bolts (18). 5. Remove bolts (19) that connect housing to oil pan (20). Remove housing from cylinder block. The weight of housing is approximately 105 kg (230 lb). 6. Check O-ring seal (21) and bearing (22) on adapter and replace if necessary. 7. Check bearing (23) and O-ring seal (24) on cover and replace if necessary. 8. Remove retainer (25) from gear (9) and check bearings (26) and replace if necessary. The following steps are for the installation of the flywheel housing.9. Thoroughly clean the contact surfaces of the cylinder block and flywheel housing. Install a new gasket between the flywheel housing and the cylinder clock.10. Secure strap and a hoist to the flywheel housing, put flywheel housing in position on the cylinder block. 11. Install the bolts that hold the flywheel housing to the cylinder block. Tighten bolts 1 thru 22 in number sequence to a torque of 40 10 N m (30 7 lb ft). Tighten bolts 1 thru 9 in number sequence again to a torque of 135 20 N m (100 15 lb ft). Tighten bolts 10 thru 22 in number sequence again to a torque of 55 10 N m (40 7 lb ft).12. Install bolts that connect housing to oil pan.13. Cut flywheel housing gasket off even with the cylinder block surface. Remove excess sealant.End By:a. install crankshaft rear seal and wear sleeveb. install starting motor