105952-1611 ZEXEL 9 420 611 075 BOSCH ACTUATOR 9420611075 1059521611 me748135


 

Information actuator

BOSCH 9 420 611 075 9420611075
ZEXEL 105952-1611 1059521611
MITSUBISHI ME748135 me748135
105952-1611 ACTUATOR
Rating:
76
Buy ACTUATOR 105952-1611 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 159560-0900 GOVERNOR HOUSING
2. [8] 139006-4100 BLEEDER SCREW
4. [1] 159564-0000 COILED SPRING
5. [1] 159564-4000 SLOTTED WASHER
6. [1] 159564-4100 SLOTTED WASHER
7. [1] 159564-7321 CONNECTOR
8. [1] 020105-1240 BLEEDER SCREW M5P0.8L12
9. [1] 159564-0501 PLATE
9B. [1] 159564-6500 PLATE
9C. [1] 159584-5200 PLATE
10. [1] 020105-1240 BLEEDER SCREW M5P0.8L12
11. [1] 159569-6720 ACTUATOR
12. [2] 020106-4040 BLEEDER SCREW
13. [1] 159561-0700 GOVERNOR COVER
14. [4] 010006-7040 BLEEDER SCREW M6P1L70
15. [2] 010006-5540 BLEEDER SCREW M6P1L55 4T
16. [8] 014110-6440 LOCKING WASHER
16. [8] 014110-6440 LOCKING WASHER
16. [8] 014110-6440 LOCKING WASHER
16. [8] 014110-6440 LOCKING WASHER
17. [1] 159566-0400 GASKET
18. [1] 154390-0400 GASKET
19. [1] 154390-0500 GASKET
20. [1] 154611-8920 RACK SENSOR ASSY
20/1. [1] 479775-5220 RACK SENSOR
20/2. [1] 154614-4800 JOINT CONNECTION
20/3. [1] 026524-3040 GASKET
20/4. [1] 029310-6260 SHIM D11.5&6.4T1.00
20/5. [1] 154614-1900 UNION NUT
22. [1] 153556-4800 EYE BOLT
23. [2] 029331-2120 GASKET
27. [2] 139006-1300 BLEEDER SCREW M6P1L76
80. [1] 159584-2000 TOOTHED GEAR
81. [1] 014111-2420 LOCKING WASHER
82. [1] 013031-2120 UNION NUT
83. [1] 025803-1310 WOODRUFF KEY
90. [1] 159584-2620 BRACKET
91. [1] 020000-2040 BLEEDER SCREW M10P1.5L20
900S. [1] 025803-1310 WOODRUFF KEY
901S. [1] 025803-1610 WOODRUFF KEY

Include in #1:

108622-2061 as GOVERNOR

Cross reference number

Zexel num
Bosch num
Firm num
Name
105952-1611 
9 420 611 075 
ME748135  MITSUBISHI
ACTUATOR
K




Information:

Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Keep all exhaust manifold and turbocharger shields in place to protect hot exhaust from oil spray in the event of a line, tube or seal failure.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Wash hands after touching batteries and connectors. Use of gloves is recommended.Batteries give off flammable fumes which can explode. Ensure there is proper ventilation for batteries which are located in an enclosure.Always thaw a frozen battery before jump starting. Frozen batteries can explode.Do not smoke when observing battery electrolyte levels.Always wear protective glasses when working with batteries.Never disconnect any charging unit circuit or battery circuit cable from the battery when charging unit is operating. A spark can cause the flammable vapor mixture of hydrogen and oxygen to explode.Fire or Explosion Prevention
Fire may result from lubricating oil or fuel sprayed on hot surfaces causing personal injury and property damage. Inspect all lines and tubes for wear or deterioration. They must be routed, supported or clamped securely. Tighten all connections to the recommended torque. Leaks can cause fires.Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices (i.e. air inlet shutoff) suitable for the application involved.All fuels, most lubricants and some coolant mixtures are flammable.Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes is extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Batteries give off flammable fumes which can explode.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the engine.Do not expose the engine to flames, burning brush, etc., if at all possible.Shields (if equipped), which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Provide adequate and proper waste oil disposal. Oil and fuel filters must be properly installed and housing covers tightened to proper torque when being changed.Batteries must be kept clean, covers kept on all cells, recommended cables and connections used and battery box covers kept in place when operating.When starting from an external source, always connect the positive (+) jumper cable to the POSITIVE (+) terminal of the

Have questions with 105952-1611?





Group cross 105952-1611 ZEXEL

Mitsubishi 

9 420 610 517 
ME740558 
ACTUATOR
 
ME740624 
ACTUATOR
105952-1611  
9 420 611 075 
ME748135 
ACTUATOR

Hino 

F 019 Z5E 989 
223203880A 
ACTUATOR

Mitsubishi 

 
ME740626 
ACTUATOR
 
ME742624 
ACTUATOR
F 019 Z5E 990 
ME748132 
ACTUATOR
F 019 Z5E 991 
ME740629 
ACTUATOR
F 019 Z1E 897 
 
ACTUATOR
 
 
ACTUATOR
 
 

 
 

Mitsubishi 

 
ME740863 
ACTUATOR
9 420 611 076 
ME741599 
ACTUATOR
F 019 Z9E 110 
ME740860 
ACTUATOR
F 019 Z9E 111 
ME741774 
ACTUATOR
9 420 614 724 
ME742609 
ACTUATOR

Hino 

 
223009050A 
ACTUATOR
 
223009051A 
ACTUATOR
9 420 610 688 
223009052A 
ACTUATOR
 
 
ACTUATOR
F 01G 29N 07C 
 
ACTUATOR
F 01G 29N 07D 
 
ACTUATOR
Back to top