Information actuator
BOSCH
F 019 Z3E 387
f019z3e387
ZEXEL
105952-0281
1059520281

Rating:
Scheme ###:
1. | [1] | 159560-0820 | GOVERNOR HOUSING |
2. | [8] | 139006-4100 | BLEEDER SCREW |
3. | [1] | 029621-7050 | PACKING RING |
4. | [1] | 159564-0000 | COILED SPRING |
5. | [1] | 159564-4000 | SLOTTED WASHER |
6. | [1] | 159564-4100 | SLOTTED WASHER |
7. | [1] | 159636-3121 | CONNECTOR |
7B. | [1] | 159636-3321 | CONNECTOR |
7C. | [1] | 159636-3521 | CONNECTOR |
8. | [1] | 020105-1240 | BLEEDER SCREW M5P0.8L12 |
11. | [1] | 159567-3622 | ACTUATOR |
11/1. | [1] | 159562-0720 | PLATE;GOV. |
11/2. | [1] | 159583-1020 | STRAP |
11/3. | [1] | 159563-1700 | LEVER SHAFT |
11/4. | [2] | 029311-0170 | SHIM |
11/4. | [2] | 029311-0170 | SHIM |
11/5. | [2] | 016500-0710 | O-RING |
11/5. | [2] | 016500-0710 | O-RING |
11/6. | [2] | 014011-0140 | PLAIN WASHER D22&10.5T1.6 |
11/6. | [2] | 014011-0140 | PLAIN WASHER D22&10.5T1.6 |
11/8. | [1] | 016010-0940 | LOCKING WASHER |
11/9. | [1] | 159585-0720 | LINEAR DC MOTOR |
11/10. | [4] | 139006-9100 | BLEEDER SCREW |
11/11. | [1] | 159566-0720 | RACK SENSOR |
11/12. | [4] | 020105-2040 | BLEEDER SCREW M5P0.8L20 |
11/16. | [1] | 159565-2400 | LIP |
11/17. | [1] | 159568-3421 | CABLE SET |
11/18. | [2] | 020106-1440 | BLEEDER SCREW M6P1.0L14 |
11/19. | [1] | 134002-0200 | ADAPTOR |
11/21. | [1] | 159563-2500 | CONTROL LEVER |
11/22. | [1] | 159563-1600 | COILED SPRING |
11/23. | [1] | 159563-1800 | BUSHING |
11/24. | [1] | 014110-8440 | LOCKING WASHER |
11/25. | [1] | 013030-8140 | UNION NUT M8P1.25H5 |
11/26. | [1] | 159563-1000 | FLAT-HEAD SCREW |
11/27. | [2] | 155615-1700 | FLAT-HEAD SCREW |
11/27. | [2] | 155615-1700 | FLAT-HEAD SCREW |
11/28. | [2] | 029240-6010 | UNION NUT M6P1.0H5* |
11/28. | [2] | 029240-6010 | UNION NUT M6P1.0H5* |
11/29. | [1] | 159563-2701 | BRACKET |
11/30. | [1] | 479749-2400 | PULSE GENERATOR |
11/31. | [1] | 159592-0300 | UNION NUT |
11/32. | [2] | 020106-1440 | BLEEDER SCREW M6P1.0L14 |
12. | [2] | 020106-4040 | BLEEDER SCREW |
13. | [1] | 159561-0400 | GOVERNOR COVER |
14. | [4] | 010006-7040 | BLEEDER SCREW M6P1L70 |
15. | [2] | 010006-5540 | BLEEDER SCREW M6P1L55 4T |
16. | [8] | 014110-6440 | LOCKING WASHER |
16. | [8] | 014110-6440 | LOCKING WASHER |
16. | [8] | 014110-6440 | LOCKING WASHER |
17. | [1] | 154390-1600 | GASKET |
18. | [1] | 154390-0400 | GASKET |
19. | [1] | 154390-0500 | GASKET |
20. | [1] | 153021-6300 | CAP |
21. | [1] | 026524-3040 | GASKET |
22. | [1] | 029731-4680 | EYE BOLT |
23. | [2] | 029331-4230 | GASKET |
27. | [2] | 139006-1300 | BLEEDER SCREW M6P1L76 |
28. | [1] | 139006-5800 | BLEEDER SCREW |
80. | [1] | 159584-0000 | TOOTHED GEAR |
81. | [1] | 014111-2420 | LOCKING WASHER |
82. | [1] | 013031-2120 | UNION NUT |
83. | [1] | 025803-1310 | WOODRUFF KEY |
900S. | [1] | 025803-1310 | WOODRUFF KEY |
901S. | [1] | 025803-1610 | WOODRUFF KEY |
Include in #1:
106672-0011
as GOVERNOR
Cross reference number
Zexel num
Bosch num
Firm num
Name
105952-0281
F 019 Z3E 387
ACTUATOR
* K
* K
Information:
Caterpillar: Confidential Yellow
PRIORITY - FUEL INJECTOR TIMING NEEDS TO BE RESET TO NEW DIMENSION ON CERTAIN 785 TRUCKS & 3512 ENGINES - MAILED US, CAN ADA, BRAZIL, LIMITED COFA, COSA
  The information supplied in this service letter may not be valid after the termination date of this program.   Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
U-128 AU-78.1 B-8 O-72.1 PRIORITY 1290 PI3345 COMPLETION DATE Termination Date
February 28, 1989 August 31, 1989
Problem
The dimension for fuel injector timing has been changed. The new dimension will help increase the service life of the pistons.
Affected Product
Model Identification Number 785 8GB127, 173, 174, 197, 208, 209, 221, 223, 224, 228-230, 232-236, 241-243, 244-254, 257, 265, 267, 268, 270 3512 96Z381, 391
Parts Needed
1 - 4W5140 Plate
Action Required
Change the fuel injector timing to 87.3 mm using the procedure in the Service Manual. Stamp the information which follows on the new information plate and install the plate. AR NO. 1W5220 PERF SPEC 0T5183 MAX ALT 2250 M FULL LOAD STATIC FUEL 8.80 mm FULL TORQ. STATIC FUEL 11.0 mm POWER 1382 hp 1031 kw A/F RATIO DYNAMIC 2.00 mm BARE ENG. HIGH IDLE RPM 1950 FULL LOAD RPM 1750 FUEL TIMING 87.30 mm
Service Claim Allowances
Caterpillar Dealer Suggested Customer Suggested Parts Labor Hrs. Parts Labor Hrs. Parts Labor Hrs. (D/N) (Sell) (C/L) (Sell) 100%
PRIORITY - FUEL INJECTOR TIMING NEEDS TO BE RESET TO NEW DIMENSION ON CERTAIN 785 TRUCKS & 3512 ENGINES - MAILED US, CAN ADA, BRAZIL, LIMITED COFA, COSA
  The information supplied in this service letter may not be valid after the termination date of this program.   Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
U-128 AU-78.1 B-8 O-72.1 PRIORITY 1290 PI3345 COMPLETION DATE Termination Date
February 28, 1989 August 31, 1989
Problem
The dimension for fuel injector timing has been changed. The new dimension will help increase the service life of the pistons.
Affected Product
Model Identification Number 785 8GB127, 173, 174, 197, 208, 209, 221, 223, 224, 228-230, 232-236, 241-243, 244-254, 257, 265, 267, 268, 270 3512 96Z381, 391
Parts Needed
1 - 4W5140 Plate
Action Required
Change the fuel injector timing to 87.3 mm using the procedure in the Service Manual. Stamp the information which follows on the new information plate and install the plate. AR NO. 1W5220 PERF SPEC 0T5183 MAX ALT 2250 M FULL LOAD STATIC FUEL 8.80 mm FULL TORQ. STATIC FUEL 11.0 mm POWER 1382 hp 1031 kw A/F RATIO DYNAMIC 2.00 mm BARE ENG. HIGH IDLE RPM 1950 FULL LOAD RPM 1750 FUEL TIMING 87.30 mm
Service Claim Allowances
Caterpillar Dealer Suggested Customer Suggested Parts Labor Hrs. Parts Labor Hrs. Parts Labor Hrs. (D/N) (Sell) (C/L) (Sell) 100%
Have questions with 105952-0281?
Group cross 105952-0281 ZEXEL
Isuzu
Isuzu
Nissan-Diesel
Mitsubishi
Hino
105952-0281
F 019 Z3E 387
ACTUATOR